𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Analysis and design of stub bandpass filters using tapped-line geometry

✍ Scribed by Tae-Soon Yun; Yong-Kyu Yoon; Byungje Lee; Jin-Joo Choi; Jin-Young Kim; Jong-Chul Lee

Publisher
John Wiley and Sons
Year
2009
Tongue
English
Weight
359 KB
Volume
51
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

A simplified mathematical design method for tapped‐line geometry is presented and the stub bandpass filters (BPFs) of λ~g~/4 and λ~g~/2 stubs with a center frequency of 5.8 GHz and a bandwidth of 5% are successfully designed, fabricated, and characterized using this approach. Design parameters for the tapped‐line geometry of the filter prototypes are obtained using input (output) admittance toward source (load), where the open‐stub and the additional transmission‐line with a negative electrical length are taken into account for filter implementation. The electrical lengths of the stubs and lines are functions of the line admittance and J‐inverter. The filters are implemented on a RT‐duroid substrate and the results from modeling and measurement show good agreement with each other. © 2009 Wiley Periodicals, Inc. Microwave Opt Technol Lett 51: 2338–2341, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24615

📜 SIMILAR VOLUMES

Stepped impedance resonator bandpass fil
Stepped impedance resonator bandpass filters using tapped-line for controlling spurious response
✍ Min-Hung Weng; Wu-Nan Chen; Tsung-Hui Huang; Cheng-Yuan Hung; Hung-Wei Wu 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 167 KB

## Abstract A stepped impedance resonator bandpass filter was designed and implemented, combining with the tapped‐line structure. The measured bandpass filters at the center frequency of 2.0 GHz has the characteristics: the insertion loss __S__~21~ = −2.98 dB, BWR is 15.1%, and the transmission zer

Design of compact dual-band bandpass fil
Design of compact dual-band bandpass filter using short stub loaded resonator
✍ Fu-Chang Chen; Qing-Xin Chu; Zhi-Hong Tu 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 275 KB

## Abstract Compact dual‐band bandpass filter using short stub loaded resonators is presented in this letter, the proposed resonator possesses the advantage that its center frequency of the even mode can be flexibly controlled, whereas that of the odd‐mode is fixed. A dual‐band filter using pseudo‐

Design of compact triple-mode bandpass f
Design of compact triple-mode bandpass filter using double center stubs-loaded resonator
✍ Long Zhang; Zhi-Yuan Yu; Shao-Guo Mo 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 323 KB

## Abstract A compact microstrip triple‐mode bandpass filter using half‐wavelength (λ/2) open‐ended microstrip line with double center loaded stubs is proposed in this article.By introducing a radial‐line stub to the traditional dual‐mode resonator, a triple‐mode resonator is realized and the mode

Analysis of parallel coupled-line bandpa
Analysis of parallel coupled-line bandpass filters using a ground-plane aperture
✍ Zhenyu Zhang; Yong-Xin Guo; Ling Chuen Ong; M. Y. W. Chia 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 167 KB

## Abstract Parallel coupled‐line bandpass filters using the ground‐aperture technique are analyzed in this paper. A design guide and design curves for this kind of coupled‐line bandpass filter on commonly used high‐ and low‐permittivity substrates are presented. Based on the proposed design curves

A design of a narrow bandpass filter wit
A design of a narrow bandpass filter with attenuation poles using coupled lines and resonators
✍ Senji Yokokawa 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 710 KB

## Abstract This paper describes the design of a narrow bandpass filter with attenuation poles used at high frequencies. The filter circuit is new and consists of coupled lines and resonators. This paper analyzes how the filter characteristics vary with these circuit parameters. A bandpass filter d