## Abstract In this letter, a novel microstrip bandpass filter (BPF) with half asymmetric resonators is presented.With Filter structure and capacitively loaded coupling, a wide bandwidth with sufficient rejection level can be achieved easily. The electromagnetic simulation is used, and the prototyp
An ultra-wide stopband microstrip bandpass filter
✍ Scribed by Guangming Zheng; Weigan Lin
- Publisher
- John Wiley and Sons
- Year
- 2010
- Tongue
- English
- Weight
- 383 KB
- Volume
- 52
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
This article develops a novel microstrip bandpass filter with ultra‐wide stopband.With the assistance of open stubs and interdigital capacitors, a very wide stopband with a sufficient rejection level can be achieved easily. Detailed design and synthesis procedures are provided. Moreover, the electromagnetic simulator ansoft designer v3 is used, and the prototype of the bandpass filter is fabricated and measured. Good agreement between measured and theoretically predicted results demonstrates feasibility of the proposed filter. © 2010 Wiley Periodicals, Inc. Microwave Opt Technol Lett 52:2218–2221, 2010; Published online in Wiley InterScience (www.interscience. wiley.com). DOI 10.1002/mop.25426
📜 SIMILAR VOLUMES
## Abstract In this work, a novel microstrip bandpass filter with a wide stopband is proposed. With the assistance of an open stub, one modified open‐circuit coupled line with symmetrical feeding, a long transmission line, and a wide stopband with a sufficient rejection level can be achieved. Detai
## Abstract An ultra‐wide stopband microstrip lowpass filter(LPF) for harmonics suppression is introduced in this letter. The LPF is composed of three open stubs, a pair of spur‐lines, and a pair of parallel coupled‐lines with symmetrical structure. Measured results verify that the filter has a ret
We present the development of a miniaturized broadband Wilkinson power divider on a multilayer organic substrate with integrated thin film resistors. The VSWR for all port for both dividers is better than 1.6:1, the excess insertion loss is less than 1.6 dB up to 18 GHz, and 12 dB of isolation is re
## Abstract In this article, a microstrip bandpass filter with a very wide stopband is provided.Based on our previous published ultra‐wide stopband bandpass filter, this proposed filter can extend the stopband range by adopting the patterned ground plane. The full‐wave electromagnetic simulator IE3
## Abstract In this paper, we propose a novel parallel‐coupled microstrip bandpass filter with a wide stopband. The proposed bandpass filter with spur lines provides a deep and wide stopband because spur lines can provide deep stopband characteristics in some frequency bands. Also, the experimental