✦ LIBER ✦

An Investigation of Process Parameters for Electrophoretic Deposition of Yttria-Stabilized Zirconia Using Design of Experiments

✍ Scribed by Ian P. Shapiro; Hui Xu; Ping Xiao; Robert Jones; David S. Rickerby

Book ID: 111328806
Publisher: John Wiley and Sons
Year: 2011
Tongue: English
Weight: 397 KB
Volume: 8
Category: Article
ISSN: 1546-542X
DOI: 10.1111/j.1744-7402.2011.02624.x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Fabrication of Yttria-Stabilized Zirconi

Fabrication of Yttria-Stabilized Zirconia Coatings Using Electrophoretic Deposition: Packing Mechanism During Deposition

✍ Changzheng Ji; Weihua Lan; Ping Xiao 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 559 KB

Improvement of the crystalline quality o

Improvement of the crystalline quality of an yttria-stabilized zirconia film on silicon by a new deposition process in reactive sputtering

✍ Susumu Horita; Toshiyuki Tajima; Masakazu Murakawa; Takaharu Fujiyama; Tomonobu 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 933 KB

Preparation of Yttria-Stabilized Zirconi

Preparation of Yttria-Stabilized Zirconia Thin Films on Strontium-Doped LaMnO3 Cathode Substrates via Electrophoretic Deposition for Solid Oxide Fuel Cells

✍ Tatsumi Ishihara; Kuninobu Shimose; Takanari Kudo; Hiroyasu Nishiguchi; Taner Ak 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 496 KB

Growth rate of yttria-stabilized zirconi

Growth rate of yttria-stabilized zirconia thin films formed by electrochemical vapor-deposition using NiO as an oxygen source

✍ Minoru Inaba; Atsushi Mineshige; Tomoyuki Maeda; Shinji Nakanishi; Tadayoshi Tak 📂 Article 📅 1997 🏛 Elsevier Science 🌐 English ⚖ 579 KB

Thin films of yttria-stabilized zirconia (YSZ) were formed onto nickel oxide substrates by an electrochemical vapor deposition process using the substrates as oxygen sources, and ZrCl, and YCl, as metal sources. After deposition at 1000°C for l-6 h, dense films of cubic YSZ were formed. The film thi

Optimization of stereolithography proces

Optimization of stereolithography process parameters for part strength using design of experiments

✍ K. Chockalingam; N. Jawahar; K.N. Ramanathan; P.S. Banerjee 📂 Article 📅 2005 🏛 Springer 🌐 English ⚖ 618 KB

Optimization of Process Parameters for a

Optimization of Process Parameters for a Quasi-Continuous Tablet Coating System Using Design of Experiments

✍ Christine Cahyadi; Paul Wan Sia Heng; Lai Wah Chan 📂 Article 📅 2010 🏛 Springer US 🌐 English ⚖ 598 KB