𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Accelerating the transient simulation of semiconductor devices using filter-bank transforms

✍ Scribed by M. Movahhedi; A. Abdipour; M. Dehghan


Publisher
John Wiley and Sons
Year
2005
Tongue
English
Weight
530 KB
Volume
19
Category
Article
ISSN
0894-3370

No coin nor oath required. For personal study only.

✦ Synopsis


Simulation of high frequency semiconductor devices, where non-local and hot carrier transport cannot be ignored, requires solution of Poisson's equation and at least the first three moments of the Boltzmann transport equation (hydrodynamic transport model). These equations form non-linear, coupled and timedependent partial differential equations. One of the most efficient solvers of such system of equations is decoupled solver. In conventional decoupled methods, the fully implicit, semi-implicit and explicit methods are used to solve the equations. In fully or semi-implicit schemes, the method is unconditionally stable for any Dt or for very large Dt compared to explicit scheme. Thus, these schemes are very suitable and efficient for transient simulations. But, using these techniques leads to a large system of linear equations. Here for the first time, a filter bank-based preconditioning method is used to facilitate the iterative solution of this system. This method provides efficient preconditioners for matrices arising from discretizing of the PDEs, using finite difference techniques. Numerical results show that the condition number and iteration number are significantly reduced.


πŸ“œ SIMILAR VOLUMES


New one- and two-dimensional algorithms
✍ M. S. Towers; A. McCowen πŸ“‚ Article πŸ“… 1988 πŸ› John Wiley and Sons 🌐 English βš– 551 KB

One-and two-dimensional algorithms for the transient simulation of semiconductor devices are presented which incorporate a solenoidal total current. The paper includes results from one-dimensional simulation of a p-n junction, including forward-to-reverse bias switching and also switch-on into high

Improving the quality of meshes for the
✍ N. Hitschfeld; L. Villablanca; J. Krause; M. C. Rivara πŸ“‚ Article πŸ“… 2003 πŸ› John Wiley and Sons 🌐 English βš– 498 KB

## Abstract This paper discusses a new post‐process algorithm for generating valid Delaunay meshes for the Box‐method (finite‐volume method) as required in semiconductor device simulation. In such an application, the following requirements must be considered: (i) in critical zones of the device, ed