## Abstract The design of a multiband planar monopole antenna with a RF/battery shielding metal case is described. The prototype of the proposed antenna with 0.8 mm in height and 50 mm in length has been fabricated. The proposed antenna exhibits sufficient bandwidth of 915 MHz (1525โ2440 MHz) with
A small wideband microstrip-fed monopole antenna
โ Scribed by Jihak Jung; Wooyoung Choi; Jaehoon Choi
- Book ID
- 115447202
- Publisher
- IEEE
- Year
- 2005
- Tongue
- English
- Weight
- 197 KB
- Volume
- 15
- Category
- Article
- ISSN
- 1531-1309
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
## Abstract In this article by using the Babinet's Equivalence Principle and selfโcomplementary structure, we present a novel printed monopole antenna for ultraโwideband (UWB) applications. The proposed antenna consists of a ground plane and radiating patch with a slot and a sleeve structure, which
## Abstract A new Tโshaped monopole antenna with a CPW feed line is presented. The theoretical analysis is based on the finiteโdifference timeโdomain (FDTD) method. The novel antenna is designed, fabricated, and then measured. The measured results, which agree with the numerical calculations very w
## Abstract An elliptical monopole antenna with a wide bandwidth is proposed, which is composed of an elliptical monopole patch and a ground plane by uniting a quarter of a disc and a rectangular structure, both printed on the same side of a substrate and fed by a coplanar waveguide (CPW) feeder.Th
## Abstract The microsripโfed ultrawideband (UWB) monopole antenna is studied. The design is demonstrated assuming FR4 substrate with a relative dielectric constant of 4.4 and thickness of 1.6 mm. The presented results show that the proposed antenna of 43 mm ร50 mm dimensions has a bandwidth from 2