Figure 10 Electric field, -polarized, backscattered from a sinusoidally deformed DCR with p s 0.1. Dashed line: h s 0; solid line: h s 0.2 tive or destructive way, thus justifying the oscillations present in Figure 10. As a final observation, we note that, by increasing the DCR dimensions, the lobe
A single feed shorted patch antenna with low cross-polarized fields
โ Scribed by H. K. Kan; R. B. Waterhouse; A. Y. J. Lee; D. Pavlickovski
- Publisher
- John Wiley and Sons
- Year
- 2006
- Tongue
- English
- Weight
- 385 KB
- Volume
- 48
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
โฆ Synopsis
Abstract
In this paper, we present a singleโfeed shorted patch antenna with low crossโpolarized radiated fields. The printed antenna uses two shorted parasitic elements symmetrically located around the driven shorted patch. These elements electromagnetically balance the radiator. We have experimentally verified the new antenna and have found its crossโpolarized radiation patterns to be significantly lower than a conventional shorted patch by an order of more than 10 dB. ยฉ 2006 Wiley Periodicals, Inc. Microwave Opt Technol Lett 48: 984โ986, 2006; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.21541
๐ SIMILAR VOLUMES
## Abstract A singleโfeed TM~21~โmode circular patch antenna with circular polarization (CP) is proposed and investigated. The operating condition for CP in the antenna is theoretically determined and experimentally validated. An impedance bandwidth of 10% (SWR โค 2) and an axial ratio bandwidth of
## Abstract With the top loading of a shorted cross patch of equal arm lengths, a cylindrical monopole antenna can have a low profile (about 7.5% of the freeโspace wavelength of the center operating frequencies) and broadband operation (larger than 23%). In addition, by comparing to the case of top
## A new and simple technique for obtaining circular polar-( ) ization CP radiation of a single-feed microstrip antenna is demonstrated. This CP design is achieยจed by insetting a single slit to the boundary of the microstrip patch, and placing a single feed along an axis 45ะ to the one containing
2 2 ลฝ . ลฝ . where 0 F lbr k y k , l: integer, 0 F n -2 ar ' y 2 2 k y k , n: integer. ## ' y The power conservation requires q q s 1. Figure 1 2 2 shows a comparison of the reflection and transmission w x coefficients between our results and 2 , indicating a good ลฝ . agreement. We use the number
## Abstract In this article, one wideband circularly polarized microstrip antenna array has been proposed and investigated. The technique of sequential rotation subarray has been employed to construct the whole antenna array, which enhances the impedance bandwidth and axial ratio (AR) bandwidth by