The present work describes the construction of a digital thermometer following the principal of conversion of diode forward-resistance into corresponding frequency using a voltage controlled oscillator circuit (VCO)) -4 It may be noted that using a stable and sensitive VCO, it is easy to convert the
A Simple Differential Air Thermometer for Use at Low Temperatures.
โ Scribed by Noyes, W. A.
- Book ID
- 125900419
- Publisher
- American Chemical Society
- Year
- 1925
- Tongue
- English
- Weight
- 205 KB
- Volume
- 47
- Category
- Article
- ISSN
- 0002-7863
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
We have developed a burst disc that can be used with superfluid helium and whose bursting pressure can be easily and accurately adjusted. It is both low cost and simple to construct. The burst pressure can be set with an accuracy of better than 1.7 kPa with a minimum burst pressure of 11 kPa.
by a movable quarter-wave dielectric insert in the waveguide. The resonator described was used to observe cyclotron resonance. The semiconductor specimen is put in with the help of the holder-light pipe 3 through a 2 mm diameter hole in the end (see Figure 1) and is placed in the antinode of the el
A thin-film platinum resistance thermometer (SDT101A, Tame Electric Work Company, Japan), which is available commercially, has useful characteristics for thermometry in the range of 20 to 300 K and in high magnetic fields up to 5 T. The Z function-table of this platinum resistance thermometer (PRT)
simple technique is described for fabricating a high conductivity silver~luminium joint for use in the construction of an aluminium superconducting heat switch which can be operated in the millikelvin temperature range.