𝔖 Bobbio Scriptorium
✦   LIBER   ✦

A second-order dual-band bandpass filter using a dual-band admittance inverter

✍ Scribed by Hualiang Zhang; Kevin J. Chen


Publisher
John Wiley and Sons
Year
2008
Tongue
English
Weight
384 KB
Volume
50
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

In this article, a second‐order dual‐band bandpass filter is designed. The filter consists of two dual‐band resonators connected by a dual‐band admittance inverter. The dual‐band resonator unit is made of two shunt stubs that coordinately produce two resonances. A novel dual‐band quarter‐wavelength line acts as the admittance inverter, providing suitable admittance transformations. To verify the design concept, a filter working at 2 and 5 GHz is devised and fabricated on Rogers' RO3006 printed circuit boards. In addition, the dual‐band filter is connected with a bandstop filter to suppress the unwanted spurious response. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 1184–1187, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23326


📜 SIMILAR VOLUMES


Third-order dual-band filter with dual-b
✍ Wei-Ping Liu; Yu-Wei Tung 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 427 KB

## Abstract In this article, stepped impedance resonator with dual‐band admittance inverter is proposed to design the dual‐band microstrip filter to operate at (2.4, 5.2) GHz and at (0.9, 2.3) GHz, respectively. The proposed dual‐band microstrip filter consists of stepped‐impedance resonators (SIRs

A dual-band bandpass filter based on dua
✍ Changzhou Hua; Chen Miao; Jin Xu; Hui Wang; Wen Wu 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 391 KB

## Abstract A dual‐band bandpass filter using a new dual‐band dual‐behavior resonator (DBR) structure is proposed.The new dual‐band DBR consists of only two stopband elements connected in parallel. One is a uniform impedance open‐circuited stub and the other is a stepped impedance open‐circuited st

Dual-band bandpass filter using defected
✍ Ka-Meng Ho; Hoi-Kai Pang; Kam-Weng Tam 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 299 KB

## Abstract A new I‐shaped defected ground structure (DGS) is used to relocate the microstrip resonator's second harmonic at the proximity of the fundamental passband to realize dual‐band bandpass filter. This DGS is validated by a compact dual‐band bandpass filter at 1.44 and 2.35 GHz with simulat

Dual-band bandpass filter using defected
✍ Akhilesh Mohan; Animesh Biswas 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 414 KB

## Abstract Dual‐band bandpass filters using defected ground structures (DGS) are presented in this letter. Dual‐band characteristics are obtained using the two resonant frequencies (modes) of a novel DGS. Two configurations of dual‐band bandpass filters are presented in this article. Both the filt

Dual-band bandpass filter by using squar
✍ Atallah Balalem; Jan Machac; Abbas Omar 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 317 KB

## Abstract This paper presents a dual‐band bandpass filter by introducing transmission zeroes in the passband of a broadband bandpass filter using square‐loop dual‐mode resonators. The transmission zeroes are achieved by using a dual‐mode resonator. The dual‐mode resonator is attached to two trans

A right slotted patch dual-mode dual ban
✍ Yan-Kuin Su; Jau-Rung Chen; Min-Hang Weng; Cheng-Yuan Hung 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 328 KB

## Abstract We proposed a novel dual‐mode dual band bandpass filter (BPF) operating at 2.4/5.7 GHz by using a right cross‐slotted patch resonator (RCSPR) combined with a pair of square etched areas (SEAs). A pair of right crossed slot embedded in the center of the patch resonator is used to tune th