## Hewlett Packard, Microwave component measurements amplitude & phase measurements of frequency translation devices using the HP8510 network analyzer, Product Note 8510-7. 3. C. John and .R.A. Speciale, A rigorous technique for measuring the scattering matrix of a multiport device with a 2-port ne
A novel substitute design for low pass strip line filter
β Scribed by Shirong Bu; Zhengxiang Luo; Kai Yang; Juanxiu Liu; Junsong Ning
- Publisher
- John Wiley and Sons
- Year
- 2007
- Tongue
- English
- Weight
- 186 KB
- Volume
- 49
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
A low pass strip line filter is fabricated by microstrip line design. This substitute method is validated by simulated and tested results. This method can be used in the design of TEM planar passive circuits. Β© 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 49: 1175β1178, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.22365
π SIMILAR VOLUMES
## Abstract This article has investigated a novel complementary splitβring resonator (CSRR) defected ground structure (DGS) theoretically and experimentally. The proposed CSRR DGS provides excellent performances including double resonant property, ripple in the passband, sharp selectivity at the cu
## Abstract How to extract equivalent circuit parameters from fullβwave results is becoming an increasingly important aspect of microstrip filter design. In this paper, a microstrip lowβpass filter that is made of six stubs is analyzed by a novel differential equation whose coefficients are determi
method can be effectively used to simulate devices that display optical bistability. ## IV. CONCLUSIONS In this paper, nonlinear bistability has been successfully simulated with the FDTD method. A recursive formulation is developed to model the saturable Kerr effect of a GaAsαGaAlAs MQW-like medi
## Abstract This article deals with novel microstrip lowβpass filter (LPF) design method using defected ground structure (DGS). The DGS allows significant length reduction of inductive microstrip lines, thus overall filter dimensions are reduced. Chebyshev prototype filter design is described and c