## Abstract A novel microstrip low‐pass filter utilizing defected ground structure (DGS) units is presented in this article. A DGS unit is simulated with different physical dimensions in order to show variation of attenuation pole and cut‐off frequency. Next, a low‐pass filter using proposed DGS un
A novel microstrip low-pass filter design method using square-shaped defected ground structure
✍ Scribed by Petr Vágner; Miroslav Kasal
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 326 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
This article deals with novel microstrip low‐pass filter (LPF) design method using defected ground structure (DGS). The DGS allows significant length reduction of inductive microstrip lines, thus overall filter dimensions are reduced. Chebyshev prototype filter design is described and conversion from lumped network structure to microstrip structure with DGS resonators is shown. For given passband ripple and cutoff frequency, a 7th order filter design is described. S‐parameters of proposed LPF are simulated and theoretical results are compared with measurement. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 2458–2462, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23692
📜 SIMILAR VOLUMES
## Abstract A novel compact microstrip low‐pass filter (LPF) is proposed in this article. The proposed LPF is composed of semicircle‐defected ground structures (S‐DGS) and semicircle stepped‐impedance shunt stubs (S‐SISS). An equivalent lumped L‐C circuit model is also presented. With the S‐DGS and
## Abstract In this article, a novel gradual change defected ground structure (DGS) for low‐pass filter (LPF) design is presented and analyzed. The proposed DGS combined with open stubs is presented to enhance the out‐band suppression. The equivalent circuit model and simulated results for the DGS
## Abstract A compact triple U‐shaped slots etched on the microstrip ground are used to implement a novel low‐pass filter.A rectangular open stub and a radius stub are used to produce transmission zeros and thus result in wide stopband. Good low‐pass performance and wide stopband characteristics ca
## Abstract In this paper, an equivalent‐circuit model of a defected ground structure (DGS) is applied to explain the characteristics of the DGS. The parameters of the circuit model are extracted from the EM‐simulation results. A novel three‐pole lowpass filter is proposed and optimized by using th
## Abstract A novel ϕ‐shape defected ground structure (DGS) is proposed in this article.Low‐pass filters are designed using the ϕ‐shape DGS with H shape open stubs line. Single, two‐cascaded and three‐cascaded ϕ‐shape DGS low‐pass filters are designed, simulated, fabricated, and measured. The reson