## Abstract In this article, a compact ultra‐wideband (UWB) band‐pass filter (BPF) with improved upper‐stopband is presented. In this design, a novel multiple‐mode resonator (MMR) with two symmetrical loading stubs and three dumbbell‐shaped defected ground structures (DGS) on the back of the filter
A compact U-shaped defected ground structure microstrip low-pass filter with wideband rejection
✍ Scribed by Kuan Deng; Wenjie Feng; Wenquan Che
- Publisher
- John Wiley and Sons
- Year
- 2010
- Tongue
- English
- Weight
- 189 KB
- Volume
- 52
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A compact triple U‐shaped slots etched on the microstrip ground are used to implement a novel low‐pass filter.A rectangular open stub and a radius stub are used to produce transmission zeros and thus result in wide stopband. Good low‐pass performance and wide stopband characteristics can be achieved by this new structure. One prototype is fabricated to demonstrate the validity of the design strategies. The simulated and measured results indicate that the insertion loss is less than 0.25 dB and the return loss is less than −16.7 dB in the whole passband. In addition, significant improvement on rejection band can be observed; the stopband bandwidth better than −25 dB is about 105% (from 2.6 to 8.4 GHz). © 2010 Wiley Periodicals, Inc. Microwave Opt Technol Lett 52: 497–499, 2010; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24960
📜 SIMILAR VOLUMES
## Abstract A novel compact microstrip low‐pass filter (LPF) is proposed in this article. The proposed LPF is composed of semicircle‐defected ground structures (S‐DGS) and semicircle stepped‐impedance shunt stubs (S‐SISS). An equivalent lumped L‐C circuit model is also presented. With the S‐DGS and
## Abstract In this letter, a compact low‐pass filter (LPF) with wideband rejection using double‐step impedance shunt stub (SISS) and barbell‐type defected ground structure (DGS) is presented. This proposed LPF has similar characteristics in bandwidth, but good wideband rejection and cutoff sharpne
## Abstract In this article, a novel gradual change defected ground structure (DGS) for low‐pass filter (LPF) design is presented and analyzed. The proposed DGS combined with open stubs is presented to enhance the out‐band suppression. The equivalent circuit model and simulated results for the DGS
## Abstract This article deals with novel microstrip low‐pass filter (LPF) design method using defected ground structure (DGS). The DGS allows significant length reduction of inductive microstrip lines, thus overall filter dimensions are reduced. Chebyshev prototype filter design is described and c
## Abstract A novel ϕ‐shape defected ground structure (DGS) is proposed in this article.Low‐pass filters are designed using the ϕ‐shape DGS with H shape open stubs line. Single, two‐cascaded and three‐cascaded ϕ‐shape DGS low‐pass filters are designed, simulated, fabricated, and measured. The reson