✦ LIBER ✦

A Network Modeling and Design Method for a 2- 18-Ghz Feedback Amplifier

✍ Scribed by Pavio, A.M.

Book ID: 114658168
Publisher: IEEE
Year: 1982
Tongue: English
Weight: 745 KB
Volume: 30
Category: Article
ISSN: 0018-9480
DOI: 10.1109/tmtt.1982.1131410

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Design and process sensitivity of a two-

Design and process sensitivity of a two-stage 6—18-GHz monolithic feedback amplifier

✍ Beall, J.M.; Nelson, S.R.; Williams, R.E. 📂 Article 📅 1985 🏛 IEEE 🌐 English ⚖ 590 KB

Design and Process Sensitivity of a Two-

Design and Process Sensitivity of a Two-Stage 6--18-GHz Monolithic Feedback Amplifier

✍ Beall, J.M.; Nelson, S.R.; Williams, R.E. 📂 Article 📅 1985 🏛 IEEE 🌐 English ⚖ 633 KB

A 40-GHz Low-Noise Amplifier With a Posi

A 40-GHz Low-Noise Amplifier With a Positive-Feedback Network in 0.18- CMOS

✍ Hsieh-Hung Hsieh; Liang-Hung Lu 📂 Article 📅 2009 🏛 IEEE 🌐 English ⚖ 743 KB

A 2 ∼ 18-GHz band distributed MMIC ampli

A 2 ∼ 18-GHz band distributed MMIC amplifier with single supply bias network

✍ Kiyoharu Seino; Tadashi Takagi; Yukio Ikeda; Takahide Ishikawa 📂 Article 📅 1988 🏛 John Wiley and Sons 🌐 English ⚖ 460 KB

A 4–18-GHz reconfigurable RF MEMS matchi

A 4–18-GHz reconfigurable RF MEMS matching network for power amplifier applications

✍ Tauno Vähä-Heikkilä; Gabriel M. Rebeiz 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 642 KB

We have developed a novel reconfigurable matching network based on the loaded-line technique. The network is composed of N-switched capacitors (N ‫؍‬ 4 -8) with a capacitance ratio of 4 -5:1 and is suitable for power amplifiers at 4 -18 GHz, or as an impedance tuner for noise parameter and load-pull

A Graphical Method for the Design of Fee

A Graphical Method for the Design of Feedback Networks for Microwave Transistor Amplifiers: Theory and Applications

✍ Perez, F.; Ortega, V. 📂 Article 📅 1981 🏛 IEEE 🌐 English ⚖ 897 KB