## Abstract In this work, a novel microstrip bandpass filter with a wide stopband is proposed. With the assistance of an open stub, one modified open‐circuit coupled line with symmetrical feeding, a long transmission line, and a wide stopband with a sufficient rejection level can be achieved. Detai
A microstrip dual-band bandpass filter with reduced size and improved stopband characteristics
✍ Scribed by Xuehui Guan; Zhewang Ma; Peng Cai; Tetsuo Anada; Gen Hagiwara
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 227 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A novel compact microstrip dual‐band bandpass filter (BPF) is developed with remarkably improved stopband characteristics. Two‐square open‐loop resonators are embedded in a U‐shaped resonator to achieve a significant size reduction of the filter. Meanwhile, a cross‐coupling between nonadjacent resonators is exploited to produce multiple transmission zeros in the stopbands of the filter. As a consequence, wide stopbands with sharp and large attenuations are obtained. Theoretical and measured frequency responses of the designed filter show a good agreement.© 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 618–620, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23154
📜 SIMILAR VOLUMES
## Abstract A novel dual‐mode band‐pass filter with a cross‐shaped resonator and three ring resonators has been designed and implemented. The proposed structure is different from the conventional dual‐mode band‐pass filter. The designed dual‐mode band‐pass filter has a very sharp attenuation rate b
## Abstract A miniaturized microstrip dual‐mode dual‐band bandpass filter is presented in this article. The filter is constructed by two slow‐wave dual‐mode resonators and two feed lines. To excite dual‐mode response, each dual‐mode resonator is coupled by an L‐shape feed line. To realize multiple
## Abstract A dual‐band microstrip bandpass filter with controllable bandwidth is proposed by using new dual‐band resonators. The resonator consists of a pair of shunt open stubs, including a stepped‐impedance open stub. The open stubs produce three transmission zeros, which result in sharp attenua
## Abstract A reduced‐size low‐loss high‐selectivity wideband microstrip bandpass filter is proposed using three λ~__g__~/4 short‐circuited stubs and folded λ~__g__~/2 connecting lines between them. The filter has 2__n__ − 1 poles within the passband, whereas it consists of only __n__ resonators. T
## Abstract In this article, a dual‐band bandpass filter is designed by using microstrip stub‐loaded two‐mode resonators. Because the resonant frequencies of the odd‐mode and even‐mode of the stub‐loaded resonator can be varied individually, the midband frequencies of the dual‐bands of filter can b