## Abstract For bone regeneration and repair, combinations of different materials are often needed. Biodegradable polymers are often combined with osteoconductive materials, such as bioactive glass (BaG), which can also improve the mechanical properties of the composite. The aim of this work was to
A mesoporous bioactive glass/polycaprolactone composite scaffold and its bioactivity behavior
✍ Scribed by Xia Li; Jianlin Shi; Xiaoping Dong; Lingxia Zhang; Hongyu Zeng
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 382 KB
- Volume
- 84A
- Category
- Article
- ISSN
- 1549-3296
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Composite scaffolds of mesoporous bioactive glass (MBG)/polycaprolactone (PCL) and conventional bioactive glass (BG)/PCL were fabricated by a solvent casting‐particulate leaching method, and the structure and properties of the composite scaffolds were characterized. The measurements of the water contact angles suggest that the incorporation of either MBG or BG into PCL can improve the hydrophilicity of the composites, and the former is more effective than the later. The bioactivity of the composite scaffold is evaluated by soaking the scaffolds in a simulated body fluid (SBF) and the results show that the MBG/PCL composite scaffolds can induce a dense and continuous layer of apatite after soaking in SBF for 3 weeks, as compared with the scattered and discrete apatite particles on the BG/PCL composite scaffolds. Such improvements (improvements of the hydrophilicity and apatite forming ability) should be helpful for the extensive applications of PCL scaffold in tissue engineering. © 2007 Wiley Periodicals, Inc. J Biomed Mater Res, 2008
📜 SIMILAR VOLUMES
## Abstract In the field of bone tissue engineering, monosized MCM‐41 spheres have been incorporated inside a bioactive glass–ceramic macroporous scaffold belonging to the SiO~2~CaOK~2~O (SCK) system so obtaining a multiscale hierarchical composite. The MCM‐41‐SCK system was prepared by dipping t
## Abstract In the past decade, tissue engineering‐based bone grafting has emerged as a viable alternative to biological and synthetic grafts. The biomaterial component is a critical determinant of the ultimate success of the tissue‐engineered graft. Because no single existing material possesses al
## Abstract The aim of this study was to investigate the __in vitro__ and __in vivo__ properties and degradation of (1) self‐reinforced (SR) lactide copolymer, P(L/DL)LA 70:30, and (2) SR composites of the same polylactide and bioactive glass 13‐93. The following three polymer and polymer–bioactive
## Abstract A novel bioabsorbable composite membrane of polyethylene oxide terephthalate and polybutylene terephthalate copolymer (Polyactive® 70/30) combined with bioactive glass No. 13‐93 was tested in the repair of experimental maxillary alveolar cleft defects. In this pilot study, the possible