A dual-band rectangular patch antenna stacked with parasitic gridded patch
✍ Scribed by Jeen-Sheen Row; Ching-Yuan Ai
- Publisher
- John Wiley and Sons
- Year
- 2003
- Tongue
- English
- Weight
- 115 KB
- Volume
- 38
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
This paper describes a new aperture‐coupled microstrip patch antenna with H‐shaped slots for dual‐band and dual‐polarized operations. Two orthogonal modes are excited in a single long rectangular patch to achieve the two resonant frequencies with a separation of more than 2:1. By using five parasitic conducting strips stacked on the driven patch, the impedance bandwidths can be increased and isolation of more than 34 dB between the two ports is obtained. Moreover, the cross‐polarization levels for the two polarizations are found to be better than 25 dB. © 2003 Wiley Periodicals, Inc. Microwave Opt Technol Lett 38: 44–46, 2003
📜 SIMILAR VOLUMES
## Abstract Design of a rectangular coplanar patch antenna for obtaining dual‐frequency operation using a coplanar waveguide with ground (CPWG) feed is presented. This is achieved by introducing an CPWG feed line attaching on the diagonal of the patch. Details of the proposed designs are described,
## Abstract The displacement of the upper patch in the resonant direction in a dual‐band stacked microstrip patch antenna controls the centre frequencies of the bands, their separation, the input impedance, and the radiation pattern at the upper band. The radiation pattern has low sensitivity to th
## Abstract A new design of two stacked shorted patch antennas integrated on the same microwave substrate for DCS and WLAN dual‐band operations is presented. The two antennas together occupy a small area of 19×28.5 mm^2^, and the heights for the DCS and WLAN antennas are 10 and 5.2 mm, respectively
## Abstract This paper presents design simulation, implementation, and measurement of a miniaturized GPS/K‐PCS dual‐band LTCC chip antenna for mobile communication handsets. The dimensions of the LTCC chip antenna is 9 × 15 × 1.2 mm. The meander‐type radiating patch for dual‐band operation is reali