✦ LIBER ✦

A design method for partial-response filters

✍ Scribed by Klaus Huber

Publisher: John Wiley and Sons
Year: 1988
Tongue: English
Weight: 226 KB
Volume: 1
Category: Article
ISSN: 0894-3370
DOI: 10.1002/jnm.1660010302

No coin nor oath required. For personal study only.

✦ Synopsis

A design method for filters having duobinary or modified duobinary signal pulses as impulse response is presented.

📜 SIMILAR VOLUMES

A design method for improvement of λg/4

A design method for improvement of λg/4 coupled-line narrow bandpass filter response

✍ G. Prigent; E. Rius; F. Le Pennec; S. Le Maguer 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 385 KB

## Abstract This paper discusses various changes made in classical coupled‐line narrow bandpass filters to somehow improve frequency response. First, the resonator's strip width was broadened to improve the lines' unloaded __Q__ factor. Second, the in/out coupled‐line sections were replaced by tapp

A novel design method for tapered strip

A novel design method for tapered strip lines as microwave filters

✍ A. Toscano; F. Bilotti; L. Vegni 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 108 KB

## Hewlett Packard, Microwave component measurements amplitude & phase measurements of frequency translation devices using the HP8510 network analyzer, Product Note 8510-7. 3. C. John and .R.A. Speciale, A rigorous technique for measuring the scattering matrix of a multiport device with a 2-port ne

Simplified design and analysis method fo

Simplified design and analysis method for a waveguide iris filter

✍ Aravind B. Sanadi; M. Ramesh; A. T. Kalghatgi 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 118 KB 👁 1 views

A simplified method for design and analysis of a direct coupled waveguide iris filter suitable for computer aided design implementation is presented. A curve fit formula for calculating the aperture dimensions of an iris as a function of normalized shunt inductor values is given. The analysis of the

Modified genetic algorithm to design arb

Modified genetic algorithm to design arbitrary response filters for rectangular waveguides

✍ Daniel L. Faircloth; Michael E. Baginski; Sadasiva M. Rao; Stuart M. Wentworth; 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 231 KB

A method of double cross-coupling lines

A method of double cross-coupling lines for HTS filter design

✍ Sili Liao; Xiaoping Zhang; Xubo Guo; Bin Wei; Bisong Cao 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 355 KB

## Abstract This article proposes a method of double cross‐coupling lines to produce the transmission zeros independently in the both close‐to‐band rejections of HTS filter, and that their positions are controllable. An eight‐pole HTS filter is simulated to present the feasibility of this method. A

A FILTER DESIGN METHOD BASED ON COMBINAT

A FILTER DESIGN METHOD BASED ON COMBINATION WAVELETS

✍ J.C. Ma; L. Luo; Q.B. Wu 📂 Article 📅 1997 🏛 Elsevier Science 🌐 English ⚖ 158 KB

This paper presents a method to design a filter with combination wavelets. The combination wavelets filter (CWF) is formed by frequency shift and single wavelet superposition. This paper discusses how to select the parameters needed to construct the filters with Gaussian combination wavelets. The lo