A constitutive model of polyacrylate interpenetrating polymer networks for dielectric elastomers

✍ Scribed by Nakhiah C. Goulbourne

• Publisher: Elsevier Science
• Year: 2011
• Tongue: English
• Weight: 717 KB
• Volume: 48
• Category: Article
• ISSN: 0020-7683
• DOI: 10.1016/j.ijsolstr.2010.10.028

✦ Synopsis

A physically based method is proposed to represent interpenetrating polymer networks and their electromechanical behavior. The mechanical behavior of the material is nonlinear elastic and the electromechanical coupling arises from electrostatic effects often called the Maxwell stress effect. Ha et al. have synthesized interpenetrating polymer networks (IPNs) that invalidate the need for an external pre-stretch mechanism in dielectric elastomers. IPNs of acrylic elastomer and 1, 6-hexanediol diacrylate were successfully synthesized to create free-standing films with preserved prestretch. This results in a dual polymer network, with one polymer network in tension and the other in compression. The prestretch is preserved chemically in the dominant network. The internal prestretch is accompanied by an overall stiffening of the dual polymer network leading to compromised actuation strains. A mechanistically simple representation of the networks is proposed by means of a model of two springs in parallel, replaced by an equivalent single spring. A material parameter is introduced to account for the effect of the weight percent of the secondary network. The effect of the additive on the preserved prestretch in the primary network and hence the overall stress strain response is determined. Specifically, a modified Ogden strain energy function is proposed that describes the mechanical behavior of the new interpenetrating polymer network. The electromechanical response of the material is described using a previously presented constitutive formulation that works well for single network polymers. The model results indicate that ideally an interpenetrating polymer network DE should not stiffen when the secondary network is formed to avoid reduced actuation strains.