Semi- and fully interpenetrating polymer networks based on polyurethane-polyacrylate systems. VIII. The influence of the degree of crosslinking of the second formed network on the morphology and properties of polyurethane polymethylacrylate interpenetrating polymer networks
โ Scribed by D. J. Hourston; J. A. McCluskey
- Publisher
- John Wiley and Sons
- Year
- 1986
- Tongue
- English
- Weight
- 459 KB
- Volume
- 31
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
## Synopsis Two latex interpenetrating polymer networks, one prepared from a pair of supposedly compatible polymers and the other from an incompatible pair, were investigated using transmission electron microscopy and dynamic mechanical analysis. From the results, it was proposed that both interpe
Damping properties of epoxy resin/polyurethane (EP/PU) semi-interpenetrating polymer networks (IPNs) were studied by the dynamic mechanical analysis (DMA) method. It shows that the semi-IPNs have excellent damping properties at ordinary temperature. The maximum value of tan 6 is about 1 when the wei
Because of their incompatibility and the different refractive indices of the homopolymer components, polyurethane/polystyrene interpenetrating polymer networks are turbid by nature. Different parameters likely to enhance their transparency are examined: the crosslink density of each network and the
The epoxy resin/polyurethane semi-IPN was prepared and the glass transition behavior of the semi-IPN was discussed with DSC and DMA methods. The results show that the two glass transition temperatures (T,) referring to epoxy resin and polyurethane respectively get closer. Between the two T, there ex