## Abstract A fully integrated ultrawideband (UWB) bipolar cascode with metal oxide semiconductor field effect transistor (BiFET) mixer using standard commercial 0.35‐μm silicon germanium bipolar complementary metal oxide semiconductor technology was first proposed and fabricated in this study. Thi
A 60 GHz mixer using 0.25 μm SiGe BiCMOS technology
✍ Scribed by Sang-Heung Lee; Ja-Yol Lee; Haecheon Kim
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 783 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
In this article, a 60 GHz band down‐conversion mixer for 60 GHz wireless personal‐area network is designed and fabricated on a chip using 0.25 μm SiGe:C BiCMOS process technology. To design this 60 GHz band mixer, architecture of double‐balanced mixer is used, including input and output balun circuits, which are composed of active elements. The results of the fabricated mixer measured between RF 57 and 63 GHz show conversion gain of 12.0–10.7 dB, LO to RF isolation and LO to IF isolation of more than 28 dB, and input P1dB of −17 to −18 dBm. The chip size of the manufactured mixer is 1.3 mm × 0.8 mm. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 3007–3009, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23887
📜 SIMILAR VOLUMES
In this paper, a down-conversion double-balanced micromixer with very good linearity for 5-GHz-band WLAN applications using 0.35-m SiGe BiCMOS technology is presented. Good conversion gain of 7.3 dB, LO-RF isolation of 50 dB, LO-IF isolation of 45 dB, and RF-IF isolation of 28.5 dB are achieved at m
In this paper, a 4.2-5.4 GHz, ÀGm LC voltage controlled oscillator (VCO) for IEEE 802.11a standard is presented. The circuit is designed with AMS 0.35 lm SiGe BiCMOS process that includes high-speed SiGe Heterojunction Bipolar Transistors (HBTs). According to post-layout simulation results, phase no
## Abstract A novel 60‐GHz wideband Marchand balun fabricated with a standard 0.18 μm six‐metal‐layer CMOS process for millimeter‐wave applications is presented. A technique for achieving good balance with the fourth metal layer microstrip conductor is used in the designed Marchand balun. The fabri