A 2-pole CPW resonator BPF with attenuation poles using point-coupled λ/4 resonators
✍ Scribed by Kouji Wada; Makoto Tatsumi; Tomohide Kamiyama; Osamu Hashimoto; Hiroshi Harada
- Publisher
- John Wiley and Sons
- Year
- 2003
- Tongue
- English
- Weight
- 328 KB
- Volume
- 40
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
The aim of this study is to examine a coplanar bandpass filter (BPF) with attenuation poles using point‐coupled λ/4 resonators. The first part of this paper describes the resonance characteristics of the λ/4 resonators with chosen excitation methods. Secondly, the design of the BPF with attenuation poles using the λ/4 resonators is carried out based on general filter theory with narrowband approximation. A comparison between theory and experiment is also performed. It is confirmed that the method presented is useful for improving the BPF's skirt characteristics using λ/4 resonators. © 2004 Wiley Periodicals, Inc. Microwave Opt Technol Lett 40: 101–107, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.11297
📜 SIMILAR VOLUMES
## Abstract This paper describes the design of a narrow bandpass filter with attenuation poles used at high frequencies. The filter circuit is new and consists of coupled lines and resonators. This paper analyzes how the filter characteristics vary with these circuit parameters. A bandpass filter d
## Abstract The improvement of spurious responses of a λ/4 resonator bandpass filter (BPF) using a microstrip line (MSL) is carried out. Firstly, a basic mechanism for improving the resonance responses of the λ/4 resonator, under the condition that the excitation method is changed, is presented. Se