✦ LIBER ✦

54. Deformation and fracture of pyrolytic carbons deposited in a fluidized bed

✍ Scribed by J.C Bokros; R.J Price

Publisher: Elsevier Science
Year: 1965
Tongue: English
Weight: 131 KB
Volume: 3
Category: Article
ISSN: 0008-6223
DOI: 10.1016/0008-6223(65)90120-x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

53. The structure of pyrolytic carbon de

53. The structure of pyrolytic carbon deposited in a fluidized bed

✍ J.C Bokros 📂 Article 📅 1965 🏛 Elsevier Science 🌐 English ⚖ 131 KB

Basal planes annealing behaviour of pyro

Basal planes annealing behaviour of pyrolytic carbons prepared in a fluidized bed

✍ G. Pellegrini; L. Vesentini; G. Saracco; I. Zubani 📂 Article 📅 1973 🏛 Elsevier Science 🌐 English ⚖ 726 KB

Microstructures of pyrolytic carbon/sili

Microstructures of pyrolytic carbon/silicon carbide mixtures Co-deposited in a bed of fluidized particles

✍ J.L. Kaae 📂 Article 📅 1975 🏛 Elsevier Science 🌐 English ⚖ 949 KB

The microstructures of pyrolytic carbon/silicon carbide mixtures codeposited in a bed of fluidized particles have been examined by transmission electron microscopy. In deposits containing about 10 per cent silicon by weight the microstructures are similar to those of pure carbons deposited under sim

Kinetics of carbon deposition in a fluid

Kinetics of carbon deposition in a fluidized bed

✍ Joseph H. Oxley; Arthur C. Secrest; Neil D. Veigel; John M. Blocher Jr. 📂 Article 📅 1961 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 632 KB

Structure and properties of pyrolytic ca

Structure and properties of pyrolytic carbons prepared in a fluidized bed between 1900° and 2400°C

✍ R.J. Price; J.C. Bokros; K. Koyama; J. Chin 📂 Article 📅 1966 🏛 Elsevier Science 🌐 English ⚖ 1003 KB

## Pyrolytic carbon deposits were produced in a fluidized bed between 1900" and 2400°C from a carrier gas containing between 1 o/0 and 15 o/0 methane. The carbons had either a 'granular', 'laxninar' or 'isotropic' microstructure. Formation of "granular" carbon occurred at low methane partial press

Mechanical properties of isotropic pyrol

Mechanical properties of isotropic pyrolytic carbon deposited in a tumbling bed

✍ H.O. Choon; Lee Jai-Young; S.M. Oh 📂 Article 📅 1985 🏛 Elsevier Science 🌐 English ⚖ 651 KB

The relation between the coating conditions and mechanical pmperties of the isotropic pyrolytic carbons deposited in a tumbling bed have been investigated. At a constant total flow rate of mixed gases and a constant revolution rate of the reaction tube. pure and Si-alloyed pyrolytic carbons were dep