Experimental results of dynamic-mechanical measurements and differential scanning calorimetry are compared for a pure diglycidyl-type epoxy/tetrafunctional aliphatic amine system and for a composite containing Kevlar ยฎbres as reinforcement. The presence of ยฎbres had marked effects on the curing reac
253. Transverse properties of carbon and kevlar fibre composites
โ Scribed by J.F. Helmer; R.J. Diefendorf
- Publisher
- Elsevier Science
- Year
- 1984
- Tongue
- English
- Weight
- 129 KB
- Volume
- 22
- Category
- Article
- ISSN
- 0008-6223
No coin nor oath required. For personal study only.
โฆ Synopsis
Young's modulus and tensile strength of carbon fibres depend strongly on the preferred orientation of carbon layers in the fibres. The preferred orientation of these graphite layers can be increased by stretching the fibres during all stages of C-fibre production. acrylic fibers to carbon fibers. Oxidative stabilization M. K. Jain, P. Desai and A. S. Abhiraman (Geor-In this paper the influence of the degree of prestretching and oxidation process parameters on intermediate products and on the properties of resulting C-fibres from PAN are presented. 253. Transverse properties of carbon and kevlar fibre composites
๐ SIMILAR VOLUMES
The mechanical and dynamic properties of oxidized carbon fibre and butadiene-styrene thermoplastic elastomer (SBS) composites were studied as a function of the level of fibre oxidation and in comparison with the properties of composites reinforced with untreated commercial carbon fibre. As a genera
Electrically conductive silicone rubber composites have been prepared through incorporation of conductive acetylene black and short carbon fibre (SCF). The percolation limit for the attainment of high conductivity is found to be relatively less for silicone rubber based composites compared to EPDM o