The influence of carbon fibre surface treatment on the mechanical properties of carbon/carbon composites
✍ Scribed by E. Fitzer; K.-H. Geigl; W. Hüttner
- Publisher
- Elsevier Science
- Year
- 1980
- Tongue
- English
- Weight
- 649 KB
- Volume
- 18
- Category
- Article
- ISSN
- 0008-6223
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract In this article the effect of graphitization in twodimensional c‐c composite bodies prepared by impregnation of novalak resin is reported. Mechanical properties were determined by bending tests and microstructural features were studied by SEM and XRD. It was found that primary graphitiz
of fiber modulus. The constants C,, and Cs6 show difference between composites containing carbonized fibers and those containing graphitized fibers; these differences are not related to fiber Young's modulus or preferred orientation. ## 44. Carbon-fiber thermal insulation Z. L. Ardary and C. W. Re
strains (about 2%) have been prepared and high perforreported for this graphitization that glassy carbon (GC) mance carbon fiber reinforced composites (CFRP) were constituting the matrix possibly changed to graphite due obtained using these fibers. The fibers have been prepared to the internal stres
Mechanical properties of carbon/carbon composites prepared by thermal-gradient CVD technique were investigated by three-point flexural tests. The mechanical properties are strongly influenced by the matrix structure, which in turn depends on the deposition conditions employed. The lower fracture str