𝔖 Bobbio Scriptorium
✦   LIBER   ✦

126. The effect of carbon fabric textile properties on-physical and mechanical properties of carbon-carbon composites

✍ Scribed by A.J. Sherrin; M.J. Evans; R. Fisher; J.V. Weaver


Publisher
Elsevier Science
Year
1976
Tongue
English
Weight
126 KB
Volume
14
Category
Article
ISSN
0008-6223

No coin nor oath required. For personal study only.

✦ Synopsis


strains (about 2%) have been prepared and high perforreported for this graphitization that glassy carbon (GC) mance carbon fiber reinforced composites (CFRP) were constituting the matrix possibly changed to graphite due obtained using these fibers. The fibers have been prepared to the internal stress between the fiber and the matrix from polyacrylonitrile precursors at carbonization tempduring heat treatment. Furthermore, this composite has eratures of the range 1200-1300Β°C with no subsequent been studied of the microstructure with an aid of oprical surface etching. The structural features of the fibers were and electron microscope and X-ray, and electromagnetic studied and it was revealed that they have (1) large radial property. By preliminary study, the CF/GC composite gradients in Young's modulus, (2) low intensity of X-ray showed to proceed rapid oxidation. Then, oxidation small angle scattering, and (3) low intensity of (002) X-ray behavior for the composite in air was here examined diffraction. The importance of fine structure of carbon comparing with those of various carbons in relation to the fibers in relation to the strength of CFRP is demonstrated. change of the microstructure. 126. The effect of carbon fabric textile properties onphysical and mechanical properties of carbon-carbon composites 132. Traitement de fibres de carbone par oxydation en phase gaxeuse


πŸ“œ SIMILAR VOLUMES


The effect of Graphitization on the Mech
✍ Dr. A. Sedghi; Prof. Dr. F. Golestani Fard πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 534 KB

## Abstract In this article the effect of graphitization in twodimensional c‐c composite bodies prepared by impregnation of novalak resin is reported. Mechanical properties were determined by bending tests and microstructural features were studied by SEM and XRD. It was found that primary graphitiz

Effects of matrix structure on mechanica
✍ Seh-Min Oh; Jai-Young Lee πŸ“‚ Article πŸ“… 1988 πŸ› Elsevier Science 🌐 English βš– 707 KB

Mechanical properties of carbon/carbon composites prepared by thermal-gradient CVD technique were investigated by three-point flexural tests. The mechanical properties are strongly influenced by the matrix structure, which in turn depends on the deposition conditions employed. The lower fracture str

146. Properties and application of Mod-3
✍ P.G Rolindk πŸ“‚ Article πŸ“… 1973 πŸ› Elsevier Science 🌐 English βš– 129 KB

ABSTRACTS and addition of graphitized pitch produced the low thermal expansion coefficient characteristic of stress relief without filament failure, and had the highest tensile and shear strengths among several 7-D materials tested. 143. Restrained thermal expansion bebavior of ATJS and some carbon