𝔖 Bobbio Scriptorium
✦   LIBER   ✦

ZnO thin films fabricated by chemical bath deposition, used as buffer layer in organic solar cells

✍ Scribed by Y. Lare; A. Godoy; L. Cattin; K. Jondo; T. Abachi; F.R. Diaz; M. Morsli; K. Napo; M.A. del Valle; J.C. Bernède


Publisher
Elsevier Science
Year
2009
Tongue
English
Weight
377 KB
Volume
255
Category
Article
ISSN
0169-4332

No coin nor oath required. For personal study only.


📜 SIMILAR VOLUMES


Characterization of chemical bath deposi
✍ Dwyer, D. ;Sun, R. ;Efstathiadis, H. ;Haldar, P. 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 680 KB

## Abstract Cadmium sulfide (CdS), indium sulfide (In~2~S~3~) and zinc sulfide (ZnS) thin films have been deposited by chemical bath deposition (CBD) for buffer layer applications in Cu–chalcopyrite‐based thin film solar cells. Films were characterized by scanning electron microscopy (SEM), UV–Vis

Inverted bulk-heterojunction organic sol
✍ Takayuki Kuwabara; Hirokazu Sugiyama; Mitsuhiro Kuzuba; Takahiro Yamaguchi; Kohs 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 488 KB

Chemical bath deposited titanium oxide (TiO x ) as an electron collection layer is introduced between the organic layer and the indium tin oxide (ITO) electrode for improving the performance of inverted bulk-heterojunction organic thin film solar cells with 1 cm 2 active area, where regioregular pol

Use of different Zn precursors for the d
✍ Sáez-Araoz, R. ;Ennaoui, A. ;Kropp, T. ;Veryaeva, E. ;Niesen, T. P. ;Lux-Steiner 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 312 KB

## Abstract Progress in fabricating Cu(In,Ga)(S,Se)~2~ (CIGSSe) solar cells with Zn(S,O) buffer layers prepared by chemical bath deposition (CBD) is discussed. The effect of different Zn salt precursors on solar cell device performance is investigated using production scale CIGSSe absorbers provide

Textured fluorine-doped ZnO films by atm
✍ Jianhua Hu; Roy G. Gordon 📂 Article 📅 1991 🏛 Elsevier Science ⚖ 854 KB

Fluorine-doped ZnO films were deposited on soda lime glass by atmospheric pressure chemical vapor deposition at temperatures from 350 to 470 °C by using diethyl zinc, ethanol and hexafiuoropropene as precursors. The deposited films typically contained about 0.1 to about 1.0 at.% fluorine with conduc