✦ LIBER ✦

XPS Investigation of Si3N4/SiC Nanocomposites Prepared Using a Commercial Polymer

✍ Scribed by Yoon-Suk Oh; Woo-Seok Cho; Chang-Sam Kim; Dae Soon Lim; Deock-Soo Cheong

Book ID: 110827754
Publisher: John Wiley and Sons
Year: 1999
Tongue: English
Weight: 205 KB
Volume: 82
Category: Article
ISSN: 0002-7820
DOI: 10.1111/j.1151-2916.1999.tb01879.x

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

In situ fabrication of Si3N4/SiC nanocom

In situ fabrication of Si3N4/SiC nanocomposite using a commercial polymer

✍ Chang-Sam Kim; Yoon-Suk Oh; Woo-Seok Cho; Dae-Soon Lim; Deock-Soo Cheong 📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 256 KB

Characterization of Si3N4/SiC nanocompos

Characterization of Si3N4/SiC nanocomposite by Raman scattering and XPS

✍ Woo-Seok Cho; Yoon-Suk Oh; Chang-Sam Kim; Minoru Osada; Masato Kakihana; Dae-Soo 📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 302 KB

Preparation of a Si3N4/SiC nanocomposite

Preparation of a Si3N4/SiC nanocomposite by high-pressure sintering of polymer precursor derived powders

✍ M.J. Gasch; J. Wan; A.K. Mukherjee 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 273 KB

Densification and Mechanical Properties

Densification and Mechanical Properties of Si3N4/SiC Nanocomposite Using Si-Nitrided Si3N4 Powder

✍ J.-F. Yang; Y.-H. Choa; T. Sekino; K. Niihara 📂 Article 📅 1999 🏛 Springer 🌐 English ⚖ 126 KB

In Situ Preparation of Si3N4/SiC Nanocom

In Situ Preparation of Si3N4/SiC Nanocomposites for Cutting Tools Application

✍ P. Šajgalík; M. Hnatko; Z. Lenčéš; J. Dusza; M. Kašiarová 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 417 KB

Wear and Creep Characteristics of a Carb

Wear and Creep Characteristics of a Carbon-Derived Si3N4/SiC Micro/Nanocomposite

✍ M. Kašiarová; E. Rudnayová; J. Kovalčík; J. Dusza; M. Hnatko; P. Šajgalík; A. Me 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 605 KB

In the presented work some properties of a recently developed Si 3 N 4 /SiC micro/nanocomposite have been investigated. The material was tested using a pin on disc configuration. Under unlubricated sliding conditions using Si 3 N 4 pin at 50 % humidity, the friction coefficient was in the range of 0