XPS determination of oxygen-containing functional groups on carbon-fibre surfaces and the cleaning of these surfaces
β Scribed by E. Desimoni; G. I. Casella; A. Morone; A. M. Salvi
- Publisher
- John Wiley and Sons
- Year
- 1990
- Tongue
- English
- Weight
- 784 KB
- Volume
- 15
- Category
- Article
- ISSN
- 0142-2421
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
Careful curve fitting is needed when using XPS to investigate oxidized functional groups on carbonβfibre surfaces. This is important because the core regions often contain a number of overlapping features some of which are of low intensity, and the C 1s region is influenced by an asymmetric graphitic feature. The fitting approach used requires that the same content of oxygenated species must be obtained from both the C 1s and O 1s regions. The approach is used to analyse untreated fibres before and after cleaning.
π SIMILAR VOLUMES
and A. Turner (Lancashire Tar Distillers Limited, Cadishead, Manchester, U.K.). Nitrogen adsorption data at 77Β°K and carbon dioxide adsorption at 195\*K on various coal and pitch solvent extract resin fractions is considered. The data is treated so that the monolayer capacity, the micropore volume,
The digital difference spectrum technique in X-ray photoelectron spectroscopy has proved to be effective for the analysis of the functional groups introduced by surface oxidation treatment of carbon fibers. The major functional groups introduced to the carbon fiber surface by surface oxidation are h
The adsorption of water vapor and carbon dioxide at room temperature in relation to carboxylic functional groups on the surfaces of 20 different types of coal was examined. The carboxylic functional groups on the surface of coal may be considered the preferential sites of adsorption when compared w