✦ LIBER ✦

Wall sampling in slurry systems

✍ Scribed by H. Nasr-El-Din; C. A. Shook; M. N. Esmail

Book ID: 112054955
Publisher: John Wiley and Sons
Year: 1985
Tongue: English
Weight: 686 KB
Volume: 63
Category: Article
ISSN: 0008-4034
DOI: 10.1002/cjce.5450630507

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Particle—wall stresses in vertical slurr

Particle—wall stresses in vertical slurry flows

✍ C.A. Shook; A.S. Bartosik 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 788 KB

Wall mass transfer in horizontal slurry

Wall mass transfer in horizontal slurry pipelines

✍ John Postlethwaite; D. N. Holdner 📂 Article 📅 1975 🏛 John Wiley and Sons 🌐 English ⚖ 528 KB

Wall mass transfer in vertical and horiz

Wall mass transfer in vertical and horizontal slurry pipelines

✍ John Postlethwaite; D. N. Holdner 📂 Article 📅 1976 🏛 John Wiley and Sons 🌐 English ⚖ 451 KB

Sampling in imaging systems

✍ Montgomery, W. Duane 📂 Article 📅 1975 🏛 Optical Society of America ⚖ 850 KB

Fluoroptic solids holdup measurement in

Fluoroptic solids holdup measurement in slurry systems

✍ P. Huizenga; R. Meijer; J. A. M. Kuipers; W. P. M. van Swaaij 📂 Article 📅 1998 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 662 KB

Automated injection of slurry samples in

Automated injection of slurry samples in flow-injection analysis

✍ M. Hulsman; M. Bos; W.E. van der Linden 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 637 KB

Two types of injectors are described for introducing solid samples as slurries in flow analysis systems. A time-based and a volume-based injector based on multitube solenoid pinch valves were built, both can be characterized as hydrodynamic injectors. Reproducibility of the injections of dispersed s