Visual inspection system for plastic extrusion
- Publisher
- Elsevier Science
- Year
- 1988
- Weight
- 86 KB
- Volume
- 9
- Category
- Article
- ISSN
- 0261-3069
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
In this paper, efficient techniques for solder joint inspection have been described. Using three layers of ring-shaped LEDs with different illumination angles, three frames of images are sequentially obtained. From these images the regions of interest (soldered regions) are segmented, and their char
Airworthiness of the civil fleet is dependent upon the ability of inspectors to identify conditions for repair. As this is primarily a visual activity, the issue of training for visual inspection is critical. The inspection training literature has little detailed advice in this area, so in response
An underwater robotic system for visual inspection of reactor vessel internals has been developed. The Korea Electric Power Robot for Visual Test (KeproVt) consists of an underwater robot, a vision processor based measuring unit, a master control station and a servo control station. The vision proce
This paper presents a Machine Vision System developed for on-line visual pulp inspection under the critical lighting requirements of the UNE-ISO 5350-2 standard. These requirements typically result in a very low dynamic range in the electronic images due to the following: high-speed displacement of