The dynamics of asymmetric rotors has been investigated in the literature. However, considering the importance in the practical "elds, the vibration characteristics of slotted shafts are not studied in detail. It needs more attention particularly with the emerging of new materials, such as composite
Vibrational characteristics of cracked shafts
โ Scribed by M.D. Rajab; A. Al-Sabeeh
- Publisher
- Elsevier Science
- Year
- 1991
- Tongue
- English
- Weight
- 622 KB
- Volume
- 147
- Category
- Article
- ISSN
- 0022-460X
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
A diagnostic method of determining the position and size of a transverse open crack on a stationary shaft without disengaging it from the machine system is investigated. The crack is modelled as a joint of a local spring. To obtain the dynamic characteristics of a stepped shaft and a multi-disc shaf
A simply supported shaft with a transverse crack is investigated for its vibrational characteristics. The local flexibility due to the presence of the crack is represented by a \(6 \times 6\) matrix for six degrees of freedom in a short shaft element which includes the crack. A finite element analys
The influence of a circumferential crack upon the torsional dynamic behavior of a shaft is studied. introduction of such a crack results in lower torsional natural frequencies due to the added flexibility. The strain energy release function is related to the compliance of the cracked shaft, that is
The effects of a transverse open crack on the modal frequency parameters of stationary shafts carrying elastically mounted end masses are presented. Dimarogonas' crack model has been considered in the problem formulation. This is a \(2 \times 2\) local flexibility matrix with coupling terms. Most of