๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

VIBRATION ANALYSIS AND DIAGNOSIS OF A CRACKED SHAFT

โœ Scribed by T.C. Tsai; Y.Z. Wang

Publisher
Elsevier Science
Year
1996
Tongue
English
Weight
460 KB
Volume
192
Category
Article
ISSN
0022-460X

No coin nor oath required. For personal study only.

โœฆ Synopsis

A diagnostic method of determining the position and size of a transverse open crack on a stationary shaft without disengaging it from the machine system is investigated. The crack is modelled as a joint of a local spring. To obtain the dynamic characteristics of a stepped shaft and a multi-disc shaft, the transfer matrix method is employed on the basis of Timoshenko beam theory. It can be combined with beam segments to derive the frequency equation for the assembly, and is then solved for the frequency as well as the corresponding mode shape of the cracked shaft. Verification of this approach by comparison with some already existing published experimental data is presented. The position of the crack can be predicted by comparing the fundamental mode shapes of the shaft with and without a crack. Furthermore the depth of the crack can be obtained by the change of natural frequency of the shaft with and without a crack.

๐Ÿ“œ SIMILAR VOLUMES

Vibration and Stress Fluctuation in Crac
Vibration and Stress Fluctuation in Cracked Shafts
โœ A.S. Sekhar; B.S. Prabhu ๐Ÿ“‚ Article ๐Ÿ“… 1994 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 346 KB

A simply supported shaft with a transverse crack is investigated for its vibrational characteristics. The local flexibility due to the presence of the crack is represented by a \(6 \times 6\) matrix for six degrees of freedom in a short shaft element which includes the crack. A finite element analys

NON-LINEAR EFFECTS OF VIBRATION OF A CON
NON-LINEAR EFFECTS OF VIBRATION OF A CONTINUOUS TRANSVERSE CRACKED SLENDER SHAFT
โœ I. Ballo ๐Ÿ“‚ Article ๐Ÿ“… 1998 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 206 KB

This paper deals with flexural vibrations of a continuous slender shaft with a crack located at a distance l n from the left end of the shaft. The mathematical model of this problem is formulated by means of the large finite element method (LFEM). The crack effect is modelled by a switching crack [1

Natural Vibrations of Cracked Shafts Car
Natural Vibrations of Cracked Shafts Carrying Elastically Mounted End Masses
โœ E.H. El-Dannanh; S.H. Farghaly ๐Ÿ“‚ Article ๐Ÿ“… 1994 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 350 KB

The effects of a transverse open crack on the modal frequency parameters of stationary shafts carrying elastically mounted end masses are presented. Dimarogonas' crack model has been considered in the problem formulation. This is a \(2 \times 2\) local flexibility matrix with coupling terms. Most of

VIBRATION AND STABILITY OF A CRACKED TRA
VIBRATION AND STABILITY OF A CRACKED TRANSLATING BEAM
โœ KEVIN D. MURPHY; YIN ZHANG ๐Ÿ“‚ Article ๐Ÿ“… 2000 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 361 KB

The vibration and stability characteristics of a cracked beam translating between "xed supports are investigated. Using Hamilton's principle and elementary fracture mechanics, the equations of motion for the beam are developed. Throughout this analysis it is assumed that the crack is shallow and alw