𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Using the multichannel analyser of an energy dispersive x-ray analysis system for quantitative image analysis

✍ Scribed by B.A. Parker


Publisher
Elsevier Science
Year
1980
Weight
110 KB
Volume
11
Category
Article
ISSN
0047-7206

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Quantitative energy-dispersive x-ray flu
✍ P. Lemberge; P. J. Van Espen πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 134 KB πŸ‘ 2 views

Energy-dispersive x-ray Γ‘uorescence in combination with partial least-squares regression (PLSR) was used to determine nickel, copper and arsenic in aqueous solutions. Di †erent spectrum pre-processing methods (square root and logarithmic transformation and top hat Ðltering) were used prior to the PL

Radioisotope photon-excited energy dispe
✍ K. H. Angeyo; J. P. Patel; J. M. Mangala; D. G. S. Narayana πŸ“‚ Article πŸ“… 1998 πŸ› John Wiley and Sons 🌐 English βš– 409 KB πŸ‘ 2 views

A semi-empirical method for improved trace multi-element determination in organic matrices based on 109Cd radioisotope energy-dispersive x-ray Γ‘uorescence (EDXRF) spectrometry is presented. It involves optimizing the geometry and electronics, interpretation and transformation of the analytical perfo

Use of layered synthetic microstructures
✍ C. Hombourger; P. Jonnard; J. -M. AndrΓ©; J. -P. Chauvineau πŸ“‚ Article πŸ“… 1999 πŸ› John Wiley and Sons 🌐 English βš– 86 KB πŸ‘ 2 views

## Measurements of long-wavelength x-rays emitted by light elements can be achieved by using selected layered synthetic microstructures (LSM). For both C Ka and N Ka radiation, W/Si (d = 3.25 nm) LSM was used. Because of the counter efficiency, the C Ka emission has the highest intensity in spite o

Evaluation of energy-dispersive x-ray fl
✍ N. K. Saini; P. K. Mukherjee; M. S. Rathi; P. P. Khanna πŸ“‚ Article πŸ“… 2000 πŸ› John Wiley and Sons 🌐 English βš– 69 KB πŸ‘ 2 views

Energy-dispersive x-ray fluorescence (EDXRF) spectrometry was used for the analysis of silicate rocks using pressed powder pellets. It is observed that with this low-cost, simple and fast technique, trace elements such as V, Cr, Co, Ni, Cu, Zn, Ga, Pb, Th, Rb, Sr, U, Y, Zr and Nb can be determined a

Development of a new software for the X-
✍ Kohji Tashiro; Hitoshi Asanaga; Kiyotaka Ishino; Ryoko Tazaki; Masamichi Kobayas πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 670 KB

A software and some useful tools have been developed for identifying individual x-ray reflectional peaks recorded with an x-ray imaging plate system. These techniques were applied to analyze the crystal structure of uniaxially oriented polymer samples. Characteristic features of the present method m