✦ LIBER ✦

Unitized boot seal for ball joints

Publisher: Elsevier Science
Year: 2002
Tongue: English
Weight: 609 KB
Volume: 2002
Category: Article
ISSN: 1350-4789
DOI: 10.1016/s1350-4789(02)09036-0

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Seal for CV joint boots

📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 161 KB

This patent refers to a new arrangement for the rotor set of the water flow control valve used in automotive cooling or air conditioning systems. The main novelty here is an arrangement of springs which are assembled in the O-ring carrier to provide mechanical robustness and assure elastic character

Inner seal for CV joint boot

📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 149 KB

## Seal for transmission with mechatronic system Patent WO 2006/133550 describes a CV joint boot fitted with an inner shield to inhibit migration of grease from the bearing into the boot.

Joint assembly and sealing boot

📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 363 KB

Sealing bellows for a ball joint

📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 355 KB

This patent describes a gasket to be used between a pair of cylindrical surfaces, particularly large diameter piles such as those used in the construction of wind turbines. The piles may be four to five metres in diameter and when installing offshore it may be necessary to accommodate misalignment a

Boot with O-ring seal for universal join

Boot with O-ring seal for universal joint housings

📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 253 KB

Sealing sub-assembly for a ball joint

📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 115 KB

## TRW Automotive GmbH, Germany A seal arrangement for the fitting of a balljoint boot to a steering knuckle is described. An L-section, metal ring forms an interference fit with the shaft. The radial flange has an integral elastomer seal that seals against the flange of the joint. The boot itself