✦ LIBER ✦

Ultralow Temperature Processing and Integration of Dielectric Resonators on Silicon Substrates for System-on-Chip Applications

✍ Scribed by Bijumon, P.V.; Freundorfer, A.P.; Sayer, M.; Antar, Y.M.M.

Book ID: 114619449
Publisher: IEEE
Year: 2008
Tongue: English
Weight: 881 KB
Volume: 55
Category: Article
ISSN: 0018-9383
DOI: 10.1109/ted.2008.925148

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Polycrystalline Silicon/Dielectric/Subst

Polycrystalline Silicon/Dielectric/Substrate Material Systems for Thin Film Transistor Applications: The Impact of Material Properties on Transistors' Characteristics

✍ Wang, Y. Z. ;Awadelkarim, O. O. 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 590 KB

Effects of bonding temperature on the pr

Effects of bonding temperature on the properties and reliabilities of anisotropic conductive films (ACFs) for flip chip on organic substrate application

✍ J.S. Hwang; M.J. Yim; K.W. Paik 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 391 KB

Survey of Robustness Enhancement Techniq

Survey of Robustness Enhancement Techniques for Wireless Systems-on-a-Chip and Study of Temperature as Observable for Process Variations

✍ Marvin Onabajo; Didac Gómez; Eduardo Aldrete-Vidrio; Josep Altet; Diego Mateo; J 📂 Article 📅 2011 🏛 Springer US 🌐 English ⚖ 906 KB

Modeling of Multilayer Suspended Microst

Modeling of Multilayer Suspended Microstrip Line and its Discontinuities on CMOS Grade Silicon Substrate for Millimeter Wave Integrated Circuit Applications

✍ Prasad, Manish ;Gaur, Arun S. ;Sharma, Vivek K. ;Pathak, Nagendra P. 📂 Article 📅 2008 🏛 Springer 🌐 English ⚖ 522 KB

Study on the Curing Process and the Gela

Study on the Curing Process and the Gelation of Epoxy/Anhydride System for No-Flow Underfill for Flip-Chip Applications

✍ Zhuqing Zhang; Erin Beatty; C. P. Wong 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 250 KB

## Abstract No‐flow underfill is used in the assembly of microelectronics to increase the productivity and to decrease the cost of the flip‐chip manufacturing. The curing process, especially the gelation of the no‐flow underfill, is essential for the yield and reliability of the flip‐chip assembly.

Characterization and reliability of dual

Characterization and reliability of dual high-k gate dielectric stack (poly-Si-HfO2-SiO2) prepared by in situ RTCVD process for system-on-chip applications

✍ Lee, S.J.; Choi, C.H.; Kamath, A.; Clark, R.; Kwong, D.L. 📂 Article 📅 2003 🏛 IEEE 🌐 English ⚖ 300 KB