Ultra-narrow linewidth Tm3+-doped fiber laser based on intra-core fiber Bragg gratings
β Scribed by Y.J. Zhang; W. Wang; S.F. Song; Z.G. Wang
- Publisher
- John Wiley and Sons
- Year
- 2009
- Tongue
- English
- Weight
- 89 KB
- Volume
- 6
- Category
- Article
- ISSN
- 1612-2011
No coin nor oath required. For personal study only.
β¦ Synopsis
A 74 pm ultra-narrow linewidth diode laser (LD) claddingding-pumped Tm 3+ -doped fiber laser was reported. The maximal continuous wave (CW) output power was 14.5 W at 1946 nm, with a slope efficiency of 37.5% and the threshold of 5.3 W. The single-mode double-cladding Tm 3+ -doped fiber had a core diameter of 15 ΞΌm (NA:0.1), and the regular hexagonal inner-cladding diameter was 200 ΞΌm (NA:0.46). The high reflection coupler was based on the intra-core fiber Bragg gratings (FBGs), which were directly written into the Tm 3+ -doped non-photosensitive fiber core by the 800 nm femtosecond laser and a phase mask. The output coupler was the other fiber end with 3.6% Fresnel reflection, and the pump source was a high power 792 nm LD with a 200 ΞΌm pigtail fiber output. According to our knowledge, this was the first report on the ultra-narrow linewidth Tm 3+ -doped fiber laser using intra-core FBGs approximately 2 ΞΌm. Beam radius, mm 0.8 0.6 0.4 0.2 0 1.0 1.
π SIMILAR VOLUMES
We have realized and studied the fiber laser based on 4-core Yb-doped fiber and multimode Bragg grating as the input reflector. The lasing efficiency slope of 55% was measured. An investigation of the output emission has shown that the far-field pattern constitutes an interference picture. That allo
We report wide wavelength tuning in a double-clad ytterbium-doped fiber laser. The laser cavity consists of an array of broadband high-reflection fiber Bragg gratings and a bulk grating as output coupler and wavelength selection element. The proposed fiber laser configuration combines low intra-cavi
Narrow line-width 793 nm laser diode cladding pumped Tm 3+ doped double cladding silica fiber laser with inline four concatenated tapers filter was reported for the first time to our knowledge. These cascade tapers located 3.6 cm from the output end of the fiber laser was fabricated by heating and s