𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Two-stage high-power L-band superfluorescent fiber source

✍ Scribed by Yun Zhang; Yigang Li; Shengping Chen; Jianping Zhu; Hua Wang; Tuanwei Xu; Kecheng Lu

Publisher
John Wiley and Sons
Year
2005
Tongue
English
Weight
87 KB
Volume
46
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

We have proposed a novel compact microstrip bandpass filter using an open-loop resonator with radial stub, which has the advantages of compact size and sharp rejection in the stopband. One transmission zero is realized in the upper stopband in order to improve the selectivity of the passband. A demonstration filter was designed, fabricated, and tested. The simulation results nearly agree with measurement results.

📜 SIMILAR VOLUMES

High power L-band erbium-doped fiber las
High power L-band erbium-doped fiber laser pumped by a C-band superfluorescent source
✍ S.-P. Chen; Y.-G. Li; K.-C. Lu; S.-H. Zhou; Z.-J. Liu 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 207 KB

The C-band is demonstrated to be suitable for pumping L-band erbium-doped fiber laser (EDFL) with a broad pumping band. A high power C-band superfluorescent fiber source (SFS) peaked at 1545 nm with output power of 1.86 W is constructed and utilized as pump source for L-band EDFL. Based on this, an

Output power characteristics of C+L-band
Output power characteristics of C+L-band erbium-doped superfluorescent fiber source
✍ Qi Wang; Yong Zhao 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 645 KB

## Abstract A new type double‐stage double‐pass configuration of the erbium‐doped superfluorescence fiber source (EDSFS) is designed and realized experimentally based on the numerical simulation and theoretical analysis.The principle of L‐band superfluorescence of erbium‐doped fiber (EDF) is invest

Gain clamped L-band EDFA using a fiber B
Gain clamped L-band EDFA using a fiber Bragg grating in two stage configuration
✍ S. W. Harun; N. Tamchek; H. Ahmad 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 68 KB

## Abstract A gain clamping technique for the long‐wavelength‐band erbium‐doped fiber amplifier (L‐band EDFA) is presented. It uses two circulators and a fiber Bragg grating (FBG) to route a backward amplified spontaneous emission (ASE) from a second‐stage amplifier and launch it back into the firs

Optimization of a two-stage erbium-doped
Optimization of a two-stage erbium-doped fiber amplifier with large-signal input power and pump lasers with moderate power
✍ M. J. Pontes; R. F. Souza; H. L. Fragnito 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 373 KB 👁 2 views

We present a theoretical analysis and experimental results for the most suitable configuration of pump power in a two-stage erbium-dopedfiber amplifier. The amplifiers are arranged in a copropagating pump scheme and use large signal input and modest pump power. Experimental results are in good agree

A two-stage ceramic tile grout sealing p
A two-stage ceramic tile grout sealing process using a high power diode laser—Grout development and materials characteristics
✍ J. Lawrence; L. Li; J.T. Spencer 📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 455 KB

Work has been conducted using a 60 Wcw high power diode laser (HPDL) in order to determine the feasibility and characteristics of sealing the void between adjoining ceramic tiles with a specially developed grout material having an impermeable enamel surface glaze. A two-stage process has been develo