✦ LIBER ✦

Tribological properties of SiCp-reinforced Al-4.5% Cu-1.5% Mg alloy composites

✍ Scribed by Stefanos Skolianos; Theo Z. Kattamis

Publisher: Elsevier Science
Year: 1993
Tongue: English
Weight: 778 KB
Volume: 163
Category: Article
ISSN: 0921-5093
DOI: 10.1016/0921-5093(93)90584-2

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Mechanical behavior of cast SiCp-reinfor

Mechanical behavior of cast SiCp-reinforced Al-4.5%Cu-1.5%Mg alloy

✍ Stefanos Skolianos 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 636 KB

Rheology of semisolid Al-4.5%Cu-1.5%Mg a

Rheology of semisolid Al-4.5%Cu-1.5%Mg alloy

✍ T.Z. Kattamis; T.J. Piccone 📂 Article 📅 1991 🏛 Elsevier Science 🌐 English ⚖ 699 KB

Hot hardness and indentation creep study

Hot hardness and indentation creep study on Al–5% Mg alloy matrix–B4C particle reinforced composites

✍ Kirity Bhusan Khan; T.R.G. Kutty; M.K. Surappa 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 357 KB

Static and Fatigue Properties of the Col

Static and Fatigue Properties of the Cold and Warm Compacted Sintered Aluminium Alloy Alumix 431 (Al-5.5 Zn-2.5 Mg-1.5 Cu)

✍ A. K. Eksi; K. Lipp; C.M. Sonsino; G. Veltl; F. Petzoldt 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 807 KB

## Abstract In this work, the densification behaviour, sintering characteristics, hardness, strength, tensile and fatigue properties of the Alumix 431 alloy (Al, Zn, Mg and Cu alloy) produced using the conventional press and sinter process in different pressures and temperatures are investigated. F

Ambient temperature mechanical propertie

Ambient temperature mechanical properties of Al–8.5Fe–1.3V–1.7Si/SiCP composite

✍ Z.H. Chen; Y.Q. He; H.G. Yan; Z.G. Chen; X.J. Yin; G. Chen 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 961 KB

Ambient temperature mechanical properties of Al-8.5Fe-1.3V-1.7Si/15 vol.%SiC P composite sheet prepared by a spray deposition (SD)-rolling process were investigated. The experimental results show that the densification method of the as-deposited preforms has an obvious effect on the mechanical prope

Mechanical properties of Al–2.5 Mg–0.1 M

Mechanical properties of Al–2.5 Mg–0.1 Mn–Si–Cr–Fe alloys

✍ A.N Shuaib 📂 Article 📅 2002 🏛 Elsevier Science ⚖ 643 KB

This paper reports the results of a study to evaluate the effect of composition and temper on the mechanical properties and formability of corrosion-resistant modified Al᎐2.5 Mg alloys. The modified alloys contain iron, silicon, manganese and chromium, in addition to magnesium. The effects of compos