𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Mechanical properties of Al–2.5 Mg–0.1 Mn–Si–Cr–Fe alloys

✍ Scribed by A.N Shuaib

Publisher
Elsevier Science
Year
2002
Weight
643 KB
Volume
23
Category
Article
ISSN
0261-3069

No coin nor oath required. For personal study only.

✦ Synopsis

This paper reports the results of a study to evaluate the effect of composition and temper on the mechanical properties and formability of corrosion-resistant modified Al᎐2.5 Mg alloys. The modified alloys contain iron, silicon, manganese and chromium, in addition to magnesium. The effects of composition and temper were evaluated using the elastic modulus, ultimate tensile strength and strain, percent elongation, and the strain-hardening coefficients of the modified alloys obtained from tension test experiments. The mechanical properties and formability of the investigated alloys were affected to various degrees by both composition and temper.

📜 SIMILAR VOLUMES

Modulated structures of Fe–10Mn–2Cr–1.5C
Modulated structures of Fe–10Mn–2Cr–1.5C alloy
✍ Li He; Zhihao Jin; Jinde Lu; Jun Tang 📂 Article 📅 2002 🏛 Elsevier Science ⚖ 413 KB

In Fe-10Mn-2Cr-1.5C alloy the superlattice diffraction spots and satellite reflections have been observed by transmission electron microscopy, these results show that the ordering structure and modulated structure have taken place in this alloy. X-ray diffraction proved that austenitic steel in this