𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Triband branch line coupler using double-Lorentz transmission lines

✍ Scribed by Hanseung Lee; Sangwook Nam

Book ID
102522843
Publisher
John Wiley and Sons
Year
2008
Tongue
English
Weight
401 KB
Volume
50
Category
Article
ISSN
0895-2477

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

The concept of double‐Lorentz (DL) transmission lines (TL) provides two additional degrees of freedom in realizing triband microwave devices. The triband operation is accomplished by the flexible phase slope characteristic of the DL TL with the frequency. In this article, the theory, design procedure, and implementation of the triband quarter‐wave (λ/4) DL TL are presented. Moreover, the triband λ/4 open‐circuit stub and triband branch‐line coupler (BLC) are introduced for the application of mobile TV service. The simulated and measured results of these triband components are also presented. The λ/4 DL TL open‐circuit stub demonstrates insertion loss larger than 17 dB at each target band. The triband BLC has S‐parameters of output larger than −4.569 dB, return losses larger than 14 dB, isolations larger than 15 dB, phase differences of output 90° ± 5° at each target band. © 2008 Wiley Periodicals, Inc. Microwave Opt Technol Lett 50: 1174–1177, 2008; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.23311

📜 SIMILAR VOLUMES

To compact ring branch-line coupler usin
To compact ring branch-line coupler using nonuniform transmission line
✍ F. Hosseini; M. Khalaj-Amir Hosseini; M. Yazdany 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 384 KB

## Abstract A compact ring Branch‐Line Coupler (BLC) with size reduction of about 50%(in circuit area) of conventional BLCs at frequency 2 GHz is introduced. The coupler is designed by using nonuniform transmission lines (NTL) instead of Uniform Transmission Lines in each arm. The normalized width

Dual-band artificial transmission lines
Dual-band artificial transmission lines branch-line coupler
✍ Giuseppina Monti; Luciano Tarricone 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 449 KB

Line coupler is presented. The adoption of such technologies adds degrees of freedom with respect to other already proposed design techniques, thus allowing the development of a very compact device, and a larger flexibility in the choice of the two operating frequencies and corresponding bandwidths.

A novel compact branch-line coupler usin
A novel compact branch-line coupler using four coupled transmission lines
✍ Mehdi Nosrati; Salman Karbasi Valashani 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 177 KB

## Abstract A compact branch line coupler (BLC) using four coupled transmission lines is introduced. The loaded part of the proposed model has a same performance with a cascade two unit elements and it is equaled by a quarter wavelength line. The quarter wavelength lines of each branch in the conve

To compact branch-line couplers using pa
To compact branch-line couplers using parallel high-impedance transmission lines
✍ Mohammad Khalaj-Amirhosseini; Mohammad Yazdani 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 441 KB

## Abstract In this article, a new way is proposed to compact the transmission lines of microstrip devices such as branch‐line couplers (BLCs).In this way, two unequal‐length high‐impedance (thin) transmission lines paralleling with each other are used instead of a single transmission line. The sho

Erratum: To compact branch-line couplers
Erratum: To compact branch-line couplers using parallel high-impedance transmission lines
✍ Mohammad Khalaj-Amirhosseini; Mohsen Yazdani 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 30 KB

## Abstract Originally published Microwave Opt Technol Lett 52: 1996–1999, 2010. © 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett 53:700–700, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.25843 (Original article DOI 10.1002/mop.25369)