Transmission electron microscopy investigations of AZ91 alloy deformed by equal-channel angular pressing
✍ Scribed by K. N. BRASZCZYŃSKA-MALIK; L. LITYŃSKA; W. BALIGA
- Book ID
- 108864232
- Publisher
- John Wiley and Sons
- Year
- 2006
- Tongue
- English
- Weight
- 153 KB
- Volume
- 224
- Category
- Article
- ISSN
- 0022-2720
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
## Abstract The microstructure of the CuNi alloy specimen ER is mainly elongated coarse grains. However, the microstructure of the specimen EH is inhomogeneous and some recrystallized sub‐grains form. In addition, the misorientation angles of the specimens ER and EH are mainly smaller than 15°, sh
An Al-4 wt.%Cu alloy in the as-cast, homogenized condition was subjected to equal-channel angular pressing, and tensile tests showed a very good combination of strength and ductility. In order to explain a sharp drop in ductility observed after the first pass only, the equal-channel angular pressing
## Abstract In the present work, investigations on the microstructure of a commercial purity 1100 aluminum that had been subjected to moderate to strong deformation (strains of 1 to 4) by equal channel angular pressing (ECAP) were carried out using X‐ray diffraction (XRD) and scanning electron micr