𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Ti and Ti-6Al-4V Coatings by Cold Spraying and Microstructure Modification by Heat Treatment

✍ Scribed by W.-Y. Li; C. Zhang; X. Guo; J. Xu; C.-J. Li; H. Liao; C. Coddet; K. A. Khor

Publisher
John Wiley and Sons
Year
2007
Tongue
English
Weight
840 KB
Volume
9
Category
Article
ISSN
1438-1656

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Post-plasma-spraying heat treatment of t
Post-plasma-spraying heat treatment of the HA coating/Ti-6Al-4V implant system
✍ Filiaggi, M. J. ;Pilliar, R. M. ;Coombs, N. A. 📂 Article 📅 1993 🏛 John Wiley and Sons 🌐 English ⚖ 741 KB

The metal/ ceramic interface that constitutes an important part of the plasma-sprayed HA-coated Ti-6A1-4V system may, in fact, represent the "weak link in the implant design. A post-plasma-spray heat treatment to enhance chemical bonding at the metal/ ceramic interface and, hence, improve the mechan

Characteristics of hydroxyapatite coated
Characteristics of hydroxyapatite coated titanium porous coatings on Ti-6Al-4V substrates by plasma sprayed method
✍ C. Y. Yang; C. R. Chen; E. Chang; T. M. Lee 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 660 KB

## Abstract A porous metal coating applied to solid substrate implants has been shown, __in vivo__, to anchor implants by bone ingrowth. Calcium phosphate ceramics, in particular hydroxyapatite [Ca~10~(PO~4~)~6~(OH)~2~, HA], are bioactive ceramics, which are known to be biocompatible and osteocondu

Porous Ti-6Al-4V alloy fabricated by spa
Porous Ti-6Al-4V alloy fabricated by spark plasma sintering for biomimetic surface modification
✍ Kon, Masayuki ;Hirakata, Luciana M. ;Asaoka, Kenzo 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 325 KB

## Abstract Porous compacts with both biological and biomechanical compatibilities and high strength were developed. Spherical powders of Ti‐6Al‐4V alloy, which were either as received or surface modified with the use of calcium ions by hydrothermal treatment (HTT), were fabricated by a spark plasm

Formation of Ultrafine-Grained Microstru
Formation of Ultrafine-Grained Microstructure of Ti–6Al–4V Alloy by Hot Deformation of α′ Martensite Starting Microstructure
✍ Hiroaki Matsumoto; Sang-Hak Lee; Yoshiki Ono; Yunping Li; Akihiko Chiba 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 584 KB

## Abstract We have presented a formation of ultrafine‐grained microstructure (d~α~ ≈ 0.2 µm) of industrial Ti–6Al–4V alloy produced by the hot compression of a sample with the acicular α′ martensite starting microstructure. The hot‐deformation behavior was different from the case of the convention

Improvement of Corrosion-Wear Resistance
Improvement of Corrosion-Wear Resistance of Ti-6Al-4V Alloy by Plasma Mo-N Surface Modification
✍ B. Tang; P.-Q. Wu; A.-L. Fan; L. Qin; H.-J. Hu; J.-P. Celis 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 282 KB 👁 2 views

Ti‐6Al‐4V alloy has attracted increasing applications as a metallic biomaterial in recent years thanks to its good corrosion resistance and biocompatibility. However, the poor corrosion‐wear resistance of the alloy is thus a major concern to potential users. In this paper, the electrochemical noise

The Deposition of Diamond Films by Combu
The Deposition of Diamond Films by Combustion Assisted CVD on Ti and Ti-6Al-4V
✍ S. H. Baek; D. F. Mihec; J. B. Metson 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 479 KB 👁 2 views

Combustion assisted (CA) CVD is one of a range of CVD methods that have been used successfully to grow diamond films on a range of substrates. Of critical interest is the role of interfacial carbides in the nucleation and adhesion of diamond at the substrate/film interface. Deposition experiments wi