𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Thermomechanical modelling of ion-conducting membrane for oxygen separation

✍ Scribed by E. Blond; N. Richet


Publisher
Elsevier Science
Year
2008
Tongue
English
Weight
726 KB
Volume
28
Category
Article
ISSN
0955-2219

No coin nor oath required. For personal study only.

✦ Synopsis


Dense mixed ionic conducting membranes are subjected to stresses induced by the oxygen activity gradient under operating conditions. This works proposed a thermomechanical model, taking into account such chemical induced strain. This model permits predictive simulation by the finite element method in transient and steady state to give guidelines for reactor operating conditions optimization. Modelling has shown that the maximum stress on the membrane depends on thermal gradient along the membrane and transient phase's management.


📜 SIMILAR VOLUMES


Novel mixed conducting SrSc0.05Co0.95O3-
✍ Pingying Zeng; Ran Ran; Zhihao Chen; Hongxia Gu; Zongping Shao; Shaomin Liu 📂 Article 📅 2007 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 246 KB 👁 1 views

## Abstract A novel perovskite‐type mixed‐conducting oxide of SrSc~0.05~Co~0.95~O~3‐δ~ (SSC) was synthesized by a combined EDTA‐citrate complexing method. The 5 mol % of Sc^3+^ doping into the B‐site of SrCoO~3‐δ~ (SC) through the sol–gel synthesis effectively stabilized the oxygen vacancy disorder

Evaluation of mixed-conducting lanthanum
✍ Lei Ge; Zongping Shao; Kun Zhang; Ran Ran; J.C. Diniz da Costa; Shaomin Liu 📂 Article 📅 2009 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 538 KB

## Abstract In this study, La~0.4~Sr~0.6~CoO~3‐δ~ (LSC) oxide was synthesized via an EDTA‐citrate complexing process and its application as a mixed‐conducting ceramic membrane for oxygen separation was systematically investigated. The phase structure of the powder and microstructure of the membrane

Mathematical Modelling of Proton-Conduct
✍ M. Ni; M. K. H. Leung; D. Y. C. Leung 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 797 KB

## Abstract Proton‐conducting solid oxide fuel cells (H‐SOFC), using a proton‐conducting electrolyte, potentially have higher maximum energy efficiency than conventional oxygen‐ion‐conducting solid oxide fuel cells (O‐SOFC). It is important to theoretically study the current–voltage (__J__–__V__) c