𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Thermogravimetric study of degradation process of diglycidyl ether of bisphenol A–1,2-diaminocyclohexane/calcium carbonate system

✍ Scribed by Lisardo Núñez; A. Castro; M. Villanueva; M. R. Núñez; B. Rial

Publisher
John Wiley and Sons
Year
2001
Tongue
English
Weight
173 KB
Volume
83
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Kinetic and thermodynamic studies of an
Kinetic and thermodynamic studies of an epoxy system diglycidyl ether of bisphenol A/1, 2 diamine cyclohexane/calcium carbonate filler
✍ Lisardo Núñez; F. Fraga; A. Castro; M. R. Núñez; M. Villanueva 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 585 KB

The curing reaction of an epoxy system consisting of a diglycidyl ether of bisphenol A (BADGE n ϭ 0) and 1,2-diaminecyclohexane (DCH) with a calcium carbonate filler was studied by differential scanning calorimetry (DSC) and using a scanning electronic microscope (SEM). As a first stage, the optimum

Kinetic and thermodynamic studies of an
Kinetic and thermodynamic studies of an epoxy system diglycidyl ether of bisphenol-A/1,2 diamine cyclohexane
✍ Lisardo Núñez; F. Fraga; L. Fraga; A. Castro 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 241 KB 👁 2 views

The curing reaction of a system consisting of a purified diglycidyl ether of bisphenol-A (BADGE, n Å 0) and 1,2 diamine cyclohexane (DCH) was studied with a differential scanning calorimeter. The objective of this article was twofold: a kinetic study from which parameters such as reaction orders, ra

Effect of thermal degradation on the mec
Effect of thermal degradation on the mechanical properties of a diglycidyl ether of bisphenol A/1,3-bisaminomethylcyclohexane (DGEBA/1,3-BAC) epoxy resin system
✍ L. Barral; J. Cano; J. López; P. Nogueira; C. Ramírez 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 411 KB 👁 2 views

The effect of thermal degradation on the mechanical properties of a diglycidyl ether of bisphenol A (DGEBA)/1,3-bisaminomethylcyclohexane (1,3-BAC) epoxy system, cured with two different curing cycles-a short cycle and a long cycle-were studied using tensile and Izod impact experiments and scanning