𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effects of diffusion on the kinetic study of an epoxy system diglycidyl ether of bisphenol A/1,2-diamine cyclohexane/calcium carbonate filler

✍ Scribed by Lisardo Núñez; F. Fraga; A. Castro; M. R. Núñez; M. Villanueva

Publisher
John Wiley and Sons
Year
2000
Tongue
English
Weight
239 KB
Volume
77
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Kinetic and thermodynamic studies of an
Kinetic and thermodynamic studies of an epoxy system diglycidyl ether of bisphenol-A/1,2 diamine cyclohexane
✍ Lisardo Núñez; F. Fraga; L. Fraga; A. Castro 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 241 KB 👁 2 views

The curing reaction of a system consisting of a purified diglycidyl ether of bisphenol-A (BADGE, n Å 0) and 1,2 diamine cyclohexane (DCH) was studied with a differential scanning calorimeter. The objective of this article was twofold: a kinetic study from which parameters such as reaction orders, ra

Effects of diffusion on the kinetic stud
Effects of diffusion on the kinetic study and TTT cure diagram for an epoxy/diamine system
✍ Lisardo Núñez; F. Fraga; M. R. Núñez; M. Villanueva 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 238 KB 👁 1 views

The curing reactions of an epoxy system consisting of a diglycidyl ether of bisphenol A (BADGE n ϭ 0) and 1,2-diamine cyclohexane (DCH) were studied to determine a time-temperature-transformation (TTT) isothermal cure diagram for this system. Differential scanning calorimetry (DSC), dynamic mechanic

Effect of thermal degradation on the mec
Effect of thermal degradation on the mechanical properties of a diglycidyl ether of bisphenol A/1,3-bisaminomethylcyclohexane (DGEBA/1,3-BAC) epoxy resin system
✍ L. Barral; J. Cano; J. López; P. Nogueira; C. Ramírez 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 411 KB 👁 1 views

The effect of thermal degradation on the mechanical properties of a diglycidyl ether of bisphenol A (DGEBA)/1,3-bisaminomethylcyclohexane (1,3-BAC) epoxy system, cured with two different curing cycles-a short cycle and a long cycle-were studied using tensile and Izod impact experiments and scanning