๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Thermodynamic properties of chlorodifluoromethane and dichloromethane Speeds of sound in the liquid up to 60 MPa

โœ Scribed by R Niepmann; G.J Esper; K.A Riemann


Publisher
Elsevier Science
Year
1987
Tongue
English
Weight
487 KB
Volume
19
Category
Article
ISSN
0021-9614

No coin nor oath required. For personal study only.


๐Ÿ“œ SIMILAR VOLUMES


The speed of sound and derived thermodyn
โœ A.F. Estrada-Alexanders; J.P.M. Trusler ๐Ÿ“‚ Article ๐Ÿ“… 1997 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 286 KB

The speed of sound u in gaseous ethane of mole-fraction purity 0.9999 has been measured along 17 isotherms at temperatures between 220 K and 450 K. At temperatures of 300 K and above, the greatest pressure on each isotherm was chosen to correspond to that at approximately one half of the critical de

The speed of sound and isentropic compre
โœ P.F. Pires; H.J.R. Guedes ๐Ÿ“‚ Article ๐Ÿ“… 1999 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 258 KB

This work reports experimental data on the speed of sound in liquid difluoromethane ลฝ . ลฝ . HFC32, or R32 from T s 248 to 343 K and pressures up to 65 MPa. The results were obtained using a newly-built apparatus, calibrated with toluene over the whole experimental region, and show good agreement wit

The speed of sound, and derived thermody
โœ P.F. Pires; H.J.R. Guedes ๐Ÿ“‚ Article ๐Ÿ“… 1999 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 152 KB

This work reports experimental data of the speed of sound in liquid trifluoromethane (HFC23, or R23) from T = (258 to 303) K at pressures up to 65 MPa, measured with a pulse-echo method adapted from Papadakis and Guedes et al. The results are fitted to a rational approximant and compared with lite

Speed of sound in carbon dioxide at temp
โœ A.F. Estrada-Alexanders; J.P.M. Trusler ๐Ÿ“‚ Article ๐Ÿ“… 1998 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 205 KB

The speed of sound u in carbon dioxide has been measured along seven isotherms at ลฝ . temperatures between 220 and 450 K by means of a spherical resonator. At supercritical temperatures, the greatest pressure on each isotherm was chosen to correspond to approximately one-half of the critical density