Measurements of molar enthalpy increments for (0.5H 2 O + 0.5C 2 H 5 OH) are reported. A counter-current water-cooled flow calorimeter was used to measure 76 enthalpy increments over the temperature range 373.2 K to 573.2 K at pressures from 0.1 MPa up to 11.3 MPa. Extrapolation of the gas phase mea
Thermodynamic evaluation of the Al2O3–H2O binary system at pressures up to 30 MPa
✍ Scribed by S. Serena; M.A. Raso; M.A. Rodríguez; A. Caballero; T.J. Leo
- Book ID
- 108085335
- Publisher
- Elsevier Science
- Year
- 2009
- Tongue
- English
- Weight
- 490 KB
- Volume
- 35
- Category
- Article
- ISSN
- 0272-8842
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
Measurements of molar enthalpy increments for (0.5 H 2 O + 0.5 CH 3 OH) are reported. A counter-current water-cooled flow calorimeter was used to measure 76 enthalpy increments over the temperature range 373.2 K to 573.2 K at pressures from 0.1 MPa up to 13.0 MPa. Extrapolation of the gas phase meas
Measurements of ( p, ρ, T ) for {xCH 3 OH + (1x)H 2 O} with x = (1.0000 and 0.4993) at specified temperatures and pressures in the compressed liquid phase were carried out with a metal-bellows variable volumometer along six isotherms between T = 320 K and T = 420 K at pressures from the bubble point
Almandine, although decomposing in the presence of metallic iron into the anhydrous subsolidus assemblage fayalite + ferrocordierite + hereynite solid solution at low pressures, melts incongruently to hercynitess -~ quartz + liquid at 10 kb. At pressures between about 12 and 20 kb the products of in
An equilibrium phase diagram has been calculated for the CaO-A1203-CaSO4-K20-H20 system at 25°C for several KOH concentrations. These KOH concentrations were chosen to relate to cement pore fluid compositions and published experimental data. In addition to the hydrates found in the CaO-A1203-CaSO4-H