✦ LIBER ✦

Thermal, mechanical, and morphological properties of phenolic resin/silica hybrid ceramers

✍ Scribed by J. M. Lin; C. C. M. Ma; F. Y. Wang; H. D. Wu; S. C. Kuang

Publisher: John Wiley and Sons
Year: 2000
Tongue: English
Weight: 292 KB
Volume: 38
Category: Article
ISSN: 0887-6266
DOI: 10.1002/1099-0488(20000701)38:13<1699::aid-polb30>3.0.co;2-l

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Morphological, thermal, and mechanical p

Morphological, thermal, and mechanical properties of polypropylene/polycarbonate blend

✍ Yin Zhihui; Zhang Xiaomin; Zhang Yajie; Yin Jinghua 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 284 KB 👁 2 views

This work deals with the effect of compatibilizer on the morphological, thermal, rheological, and mechanical properties of polypropylene/polycarbonate (PP/ PC) blends. The blends, containing between 0 to 30 vol % of polycarbonate and a compatibilizer, were prepared by means of a twin-screw extruder.

Morphology and mechanical properties of

Morphology and mechanical properties of urethane acrylate resin networks

✍ Feng Jun Hua; Chun Pu Hu 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 157 KB 👁 1 views

A series of urethane acrylate resins (UARs) having various amounts of hard segment were synthesized from poly(oxypropylene) diols (PPOs) with different molecular weights and characterized. The relationship between the morphologies and mechanical properties of these UAR (UARX-Y-Z, in which X means th

Epoxy resin–poly(ethyl methacrylate) int

Epoxy resin–poly(ethyl methacrylate) interpenetrating polymer networks: Morphology, mechanical, and thermal properties

✍ D. Chakrabarty; B. Das; S. Roy 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 328 KB 👁 1 views

Full (interpenetrating networks (IPNs)) and semi-IPNs of the epoxy resin and poly(ethyl methacrylate) (PEMA) were prepared by the sequential mode of synthesis. These were characterized with respect to their mechanical properties, namely, tensile strength, elongation at break, modulus, and toughness.

Mechanical properties, thermal stability

Mechanical properties, thermal stability, and flame retardance of novolac-type phenolic resin blended with poly(dimethylsiloxaneadipamide)

✍ Chen-Chi M. Ma; Feng-Yih Wang; Hao-Jie Lin; Sheng-Han Wu; Jen-Chang Yang 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 208 KB 👁 1 views

Thermal and mechanical properties of ara

Thermal and mechanical properties of aramid-based titania hybrid composites

✍ Z. Ahmad; M. I. Sarwar; J. E. Mark 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 121 KB 👁 1 views

The sol-gel process has been used to prepare various types of aramid-titania hybrid materials. Specifically, a mixture of m-and p-phenylenediamines was reacted with terephthaloyl chloride to produce linear polyamide chains in a dimethylacetamide solvent. Various proportions of tetrapropylorthotitana

Morphology, mechanical properties, and t

Morphology, mechanical properties, and thermal stability of polyurethane–epoxide resin interpenetrating polymer network rigid foams

✍ Y. Zhang; R. J. Heath; D. J. Hourston 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 378 KB 👁 1 views

A series of rigid interpenetrating network foams (IPNFs) based on a rosinbased polyurethane (PU) and a crosslinked epoxide resin (ER) were prepared by a simultaneous polymerization technique. The morphology, mechanical properties, thermal stability, and changes in the chemical structure during the t