Morphological, thermal, and mechanical properties of polypropylene/polycarbonate blend

✍ Scribed by Yin Zhihui; Zhang Xiaomin; Zhang Yajie; Yin Jinghua

• Publisher: John Wiley and Sons
• Year: 1997
• Tongue: English
• Weight: 284 KB
• Volume: 63
• Category: Article
• ISSN: 0021-8995
• DOI: 10.1002/(sici)1097-4628(19970328)63:13<1857::aid-app19>3.0.co;2-v

✦ Synopsis

This work deals with the effect of compatibilizer on the morphological, thermal, rheological, and mechanical properties of polypropylene/polycarbonate (PP/ PC) blends. The blends, containing between 0 to 30 vol % of polycarbonate and a compatibilizer, were prepared by means of a twin-screw extruder. The compatibilizer was produced by grafting glycidyl methacrylate (GMA) onto polypropylene in the molten state. Blend morphologies were controlled by adding PP-g-GMA as compatibilizer during melt processing, thus changing dispersion and interfacial adhesion of the polycarbonate phase. With PP-g-GMA, volume fractions increased from 2.5 to 20, and much finer dispersions of discrete polycarbonate phase with average domain sizes decreased from 35 to 3 mm were obtained. The WAXD spectra showed that the crystal structure of neat PP was different from that in blends. The DSC results suggested that the degree of crystallization of PP in blends decreased as PC content and compatibilizer increased. The mechanical properties significantly changed after addition of PP-g-GMA. ᭧ 1997