𝔖 Bobbio Scriptorium
✦   LIBER   ✦

The epoxy–polycarbonate blends cured with aliphatic amine—II. Thermal and mechanical properties mechanisms

✍ Scribed by Miaw-Ling Lin; Kuo-Hui Chang; Feng-Chih Chang; Ming-Shiu Li; Chen-Chi M. Ma

Publisher
John Wiley and Sons
Year
1997
Tongue
English
Weight
179 KB
Volume
35
Category
Article
ISSN
0887-6266

No coin nor oath required. For personal study only.

✦ Synopsis

The transamidation reaction converts the carbonate and amine into Naliphatic aromatic carbamate and urea, causing the equivalent of oxirane and amine nonstoichiometric in the primary cure stage. After postcure, the substitution reaction takes place and results in a more tightly crosslinked structure. Such a higher crosslinking density is responsible for higher T g , tensile strength, and tensile modulus in the postcure stage than that in the primary and secondary cure stages. This trend is more pronounced in those PC-epoxy blends containing higher molecular weight aliphatic amine or a higher content of PC. This phenomenon is due to the difference in the fraction of amino group of aliphatic amine consumed in the transamidation. PC-epoxy/ aliphatic amine blends show minor improvement in the high strain rate Izod impact tests, while toughness improvement for some blends is substantial at low strain rate tensile tests.

📜 SIMILAR VOLUMES

The epoxy–polycarbonate blends cured wit
The epoxy–polycarbonate blends cured with aliphatic amine—I. Mechanism and kinetics
✍ Miaw-Ling Lin; Kuo-Hui Chang; Feng-Chih Chang; Ming-Shiu Li; Chen-Chi M. Ma 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 242 KB 👁 1 views

Reaction mechanism of the PC-epoxy blends cured by aliphatic amine has been investigated by varying PC contents in the blends. The transamidation reaction tends to convert nearly all the carbonates into N-aliphatic aromatic carbamates even at ambient temperature before normal curing. The remaining a

Effect of the network structure on therm
Effect of the network structure on thermal and mechanical properties of mesogenic epoxy resin cured with aromatic amine
✍ M. Ochi; Y. Shimizu; Y. Nakanishi; Y. Murata 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 286 KB 👁 2 views

The epoxy resin containing a typical mesogenic group such as biphenol was cured with catechol novolak and aromatic diamines which have neighboring active hydrogens. In the biphenol-type epoxy resin cured with catechol novolak, 4,4-diaminodiphenylmethane, and p-phenylenediamine (PPD), the glass-rubbe

Cure behavior, morphology, and mechanica
Cure behavior, morphology, and mechanical properties of the melt blends of epoxy with polyphenylene oxide
✍ S. J. Wu; T. K. Lin; S. S. Shyu 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 330 KB 👁 1 views

Cure behavior, miscibility, and phase separation have been studied in blends of polyphenylene oxide (PPO) with diglycidyl ether of bisphenol A (DGEBA) resin and cyanate ester hardener. An autocatalytic mechanism was observed for the epoxy/PPO blends and the neat epoxy. It was also found that the epo

Effect of network structure on thermal a
Effect of network structure on thermal and mechanical properties of biphenol-type epoxy resins cured with phenols
✍ M. Ochi; N. Tsuyuno; K. Sakaga; Y. Nakanishi; Y. Murata 📂 Article 📅 1995 🏛 John Wiley and Sons 🌐 English ⚖ 491 KB 👁 1 views

In the biphenol-type epoxy resin cured with catechol novolac (CN), a very weak glass transition and, thus, a very high rubbery modulus were observed. On the other hand, the glass transition was clearly observed in the system cured with phenol novolac (PN). This means that the micro-Brownian motion o