✦ LIBER ✦

Thermal and electrochemical durability of carbonaceous composites used as a bipolar plate of proton exchange membrane fuel cell

✍ Scribed by Taro Kinumoto; Keita Nagano; Tomoki Tsumura; Masahiro Toyoda

Publisher: Elsevier Science
Year: 2010
Tongue: English
Weight: 797 KB
Volume: 195
Category: Article
ISSN: 0378-7753
DOI: 10.1016/j.jpowsour.2010.04.045

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Development of Low-Cost Advanced Composi

Development of Low-Cost Advanced Composite Bipolar Plate for Proton Exchange Membrane Fuel Cell�

✍ B. K. Kakati; V. Mohan 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 520 KB

## Abstract The bipolar plate is one of the most imperative components of proton exchange membrane fuel cells (PEMFC) which consumes up to 80% of weight and near about 50% of the total cost of the cell. Development of cost‐effective composite bipolar plate with high electrical conductivity and high

Effect of surface roughness of composite

Effect of surface roughness of composite bipolar plates on the contact resistance of a proton exchange membrane fuel cell

✍ Bharat Avasarala; Pradeep Haldar 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 696 KB

Durability and stability test of proton

Durability and stability test of proton exchange membrane fuel cells prepared from polybenzimidazole/poly(tetrafluoro ethylene) composite membrane

✍ H.L. Lin; Y.S. Hsieh; C.W. Chiu; T.L. Yu; L.C. Chen 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 826 KB

It has been reported that a thin polybenzimidazole (PBI)/poly(tetrafluoro ethylene) (PTFE) composite membrane (thickness 25-30 m) can be prepared by impregnating a thin porous PTFE (thickness 15-20 m) in a PBI/N,N -dimethyl actamide (DMAc) solution. In this paper, a 400 h life test of a fuel cell pr

Development and Characterisation of Elec

Development and Characterisation of Electrically Conductive Polymeric-Based Blends for Proton Exchange Membrane Fuel Cell Bipolar Plates

✍ S. Bouatia; F. Mighri; M. Bousmina 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 715 KB

## Abstract The main objective of this work was to develop films with controlled dimensions for proton exchange membrane fuel cell (PEMFC) bipolar plates (BPPs) using the twin‐screw extrusion process. These films consisted of a low‐viscosity polyethylene terephthalate (PET) in which a mixture of hi

Numerical simulation of thermal–hydrauli

Numerical simulation of thermal–hydraulic characteristics in a proton exchange membrane fuel cell

✍ Y.M. Ferng; C.C. Sun; A. Su 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 218 KB 👁 2 views

The thermal-hydraulic characteristics of a proton exchange membrane fuel cell (PEMFC) are numerically simulated by a simplified two-phase, multi-component flow model. This model consists of continuity, momentum, energy and concentration equations, and appropriate equations to consider the varying fl

Performance of a high Cr and Ni austenit

Performance of a high Cr and Ni austenitic stainless steel bipolar plates in proton exchange membrane fuel cell working environments

✍ Rujin Tian; Juncai Sun 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 447 KB